表面あらさの生成について(第1報) : バイト刃先あらさのレプリカ

概要

論文の詳細を見る
We have considered one of their factors to find out the mechanism of generating surface roughness, that is, replica on the finished surface by roughness of the cutting edge. In order to estimate the degree of replica we use multiple correlation coefficient, r_<i・18> and r_<i・12…i-1> ; in Fig. 4 R_1 is the roughess of the edge before cutting, R_8 is that of after cutting and R_2, ……, R_7 are those of the surfaces at six sorts of cutting depth in axial direction. In the results the deeper the surface is cut, the rougher its profile becomes and the degree standardized by roughness of edge is in proportion to their Brinell hardness. While replica is better in oil cutting than in dry and the order for these materials is the folloming ; -brass, copper, mild steel, hard steel, and cast iron. Also cutting depth at maximum value of r_<i・12…i-1> is most suitable one for the material because r_<i・12…i-1> means stability of generating roughness.
一般社団法人日本機械学会の論文
1957-06-25