Viscoplastic Behavior of SUS304 Stainless Steel Under Cyclic Loading at Room Temperature
スポンサーリンク
概要
- 論文の詳細を見る
The stress-strain relation of SUS 304 stainless steel depends strongly on the stress or strain rate even at room temperature. The stress controlled uniaxial creep-ratcheting tests were conducted at room temperature to investigate the viscoplastic behavior of SUS 304 in cyclic loading. The effects of the prestrain and the cyclic stress condition, i.e. stress rate, stress ratio, maximum stress and its hold time, on the strain accumulation are discussed. The asymptotic stress-strain curve in the tension subsequent to creep-ratcheting reaches the monotonic stress-strain curve. A creep strain rate is determined as a function of the magnitude of total strain at the present time even if the material has been subjected to cyclic stressing prior to the creep. Consequently, the strain hardening of the material can be quantified by use of the accumulated strain by creep-ratcheting.
- 一般社団法人日本機械学会の論文
- 1989-01-15
著者
-
Kondo Joe
Nkk Research Center Co. Ltd.
-
Yoshida Fusahito
Department Of Mechanical Engineering College Engineering Hiroshima University
-
KIKUCHI Yoshikazu
Nippon Steel Co., Ltd.,
-
Kikuchi Yoshikazu
Nippon Steel Co. Ltd.
-
Yoshida Fusahito
Department of Mechanical Engineering, Hiroshima University
関連論文
- Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change
- Fracture Mechanism and Forming Limit in Deep-Drawing of Magnesium Alloy AZ31
- Anomalous Surface Deformation of Sapphire Clarified by 3D-FEM Simulation of the Nanoindentation
- Influence of Strain Ratio on Bending Fatigue Life and Fatigue Crack Growth in TiNi Shape-Memory Alloy Thin Wires
- Effect of Stress Concentration on Upper Yield Point in Mild Steel
- Experimental Observation of Elasto-Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets
- Viscoplastic Parameter Identification for Lead-Free Solder Alloy by Micro-Indentation, FE Simulation and Optimization
- Identification of Viscoplastic Properties of Individual Phases in Lead-Free Solder Alloy by Depth-Sensing Microindentation
- Deformation Characteristics and Delamination Strength of Adhesively Bonded Aluminium Alloy Sheet under Plastic Bending
- Effect of Forming Speed on Plastic Bending of Adhesively Bonded Sheet Metals
- Analysis of Axial and Radial Stress Distribution in Packing in Stufling-Box Seals Taking Account of Stress Relaxation
- A Shape Determination Method for Forged Products in Consideration of Shape Complexity
- Stress Relaxation of Gland Packings and Its Modeling
- Viscoplastic Behavior of SUS304 Stainless Steel Under Cyclic Loading at Room Temperature
- Biaxial Strain Accumulation in Mechanical Ratcheting Under Varied Cyclic Stress Conditions
- Stress-Strain Response of Copper-based Spring Materials under Forward and Reverse Deformations and Its Mathematical Description II
- Stress-Strain Response of Copper-based Spring Materials under Forward and Reverse Deformations and Its Mathematical Description II
- Experimental and Calculated Cyclic Elasto-Plastic Deformations of Copper-Based Spring Materials