Tribological Properties of SUS304 Steel in Seawater : Electrochemical Approach to the Wear Behaviour
スポンサーリンク
概要
- 論文の詳細を見る
In order to clarify the tribological behaviour of SUS304 steel in seawater, the electrochemical approach was taken in this work. Wear tests were carried out at different potentials from -800mV to 600 mV (vs SCE) under the following conditions: a normal load of 10 N, a slip amplitude of 1.5mm, a frequency of 8.3Hz and total sliding distance of 3O0m (10^5 cycles) . Wear volume increased by three orders of magnitude with an increase in potential from -800mV to 600mV. The relationship between wear volume and corrosion volume was discussed. Corrosion volume was calculated from the anodic current in the polarization curve for a fresh surface, which was obtained by the potential pulse method. In conclusion, the electrochemical factor, dissolution of metal, governed the wear in seawater, while the mechanical factor was only to produce the fresh surface on the wear surface during sliding.
- 一般社団法人日本機械学会の論文
- 1992-01-15
著者
-
Iwabuchi Akira
Faculty Of Engineering Iwate University
-
Iwabuchi Akira
Faculty Of Arts Shinshu University And Faculty Of Law Daito Bunka University
-
SASAKI Toru
Utsunomiya Works, Fuji Heavy Industry Co., Ltd.
-
HORI Kiyoshi
Faculty of Engineering, Iwate University
-
TATSUYANAGI Yuji
Ichinoseki National College of Technology
-
Sasaki Toru
Utsunomiya Works Fuji Heavy Industry Co. Ltd.
-
Hori Kiyoshi
Faculty Of Engineering Iwate University
関連論文
- Fretting Damage of SUS304 in a Vacuum (Discussion of the Condition of the Crack Generation) : Vibration, Control Engineering, Engineering for Industry
- Fretting Damage of SUS304 in a Vacuum : Vibration, Control Engineering, Engineering for Industry
- Dynamic Binding of Visual Features by Neuronal/Stimulus Synchrony
- Tribological Properties of SUS304 Steel in Seawater : Electrochemical Approach to the Wear Behaviour
- Friction and wear Properties in Fretting at Room Temperature and with Liquid Nitrogen