炭素鋼の衝撃引張疲労破面の様相
スポンサーリンク
概要
- 論文の詳細を見る
In order to investigate the behavior of metals on impact fatigue, the new-type universal impact fatigue testing machine for the tests under various conditions of stress or impact velocity was devised. Then, the three tests under different load conditions, the impact tensile tests, the impact tensile fatigue and no-impact push-pull fatigue tests, have been carried out on 0.21%C steel circular notched specimens at room temperature. To understand the surface features on the impact fatigue fracture, each fractured surfaces were observed by means of scanning electron microscope. The main results obtained were as follows: (1) The four features, the lamella pattern on stage I fractured surface, the striation pattern, the dimple pattern and the cleavage pattern, were observed on both impact fatigue and non-impact fatigue fracture surface. The appearances of lamella and striation pattern on the impact fatigue fracture surface were clearer than that on the non-impact fatigue fracture surface at the same stress level. (2) And also, the striations with chasms were observed on the former surface, but not on the latter one. It can be considered that the existence of this topography is the individual features on the impact fatigue fracture surface due to the variation of stress at crack tip. (3) According to the increase of mean stress level, the area of stage I fractured surface decreased and the area of dimple pattern increased consequently. Also the striations had a tendency to disappear with the increase of mean stress.
- 社団法人日本材料学会の論文
- 1976-01-15
著者
関連論文
- 精密機器の誤差補正機構
- 位置決め精度に関する諸問題
- 炭素鋼平滑材の衝撃引張疲労における変形および破損に及ぼす荷重波形の影響
- 炭素鋼の衝撃引張疲労破面の様相
- 1-28 炭素鋼の衝撃引張疲れ破壊のフラクトグラフィ
- 1-12 衝撃疲れ破壊に関する研究 : 第 1 報試作した衝撃疲れ試験機と二, 三の実験結果
- 漸変分布荷重を受けるはりの弾塑性曲げ
- 漸変分布荷重を受けるはりの弾塑性曲げ
- 軌條鋼のフラツシ・バツト熔接後の熱処理(第 2 報) : 曲げ試驗と疲労試驗
- 軌條鋼のフラツシ、バツト熔接後の熱処理(第 1 報)
- 北陸信越地方の精密機械工業の発達と工場の地方分散
- うず巻きばねのへたりについて
- せまい長方形断面をもつはりの横倒れについての実験 : II.座屈荷重の決定方法と座屈変形
- せまい長方形断面をもつはりの横倒れについての実験 : I.片持はりの横倒れ座屈
- せまい長方形断面をもつはりの横倒れについての実験 : 2.座屈荷重の決定法と座屈変形
- せまい長方形断面をもつはりの横倒れについての実験 : 1.片持はりの横倒れ座屈
- せまい長方形断面形はりの弾塑性曲げについて(第1,2,3報)
- せまい長方形断面形はりの弾塑性曲げについて(第1・2・3報)
- 薄肉はりの座屈荷重を求める一 近似解法 : 弾性接続の考えによる解法
- 引掻き硬さについての研究 : 第2報 鍍金面の引掻き
- 薄肉はりの座屈荷重を求める一近似解法 : 弾性接続の考えによる解法