高速引張加工されたアルミニウムおよびアルミニウム-マグネシウム合金の機械的性質
スポンサーリンク
概要
- 論文の詳細を見る
This investigation has been conducted to make clear the effect of strain rate on the internal structure and the mechanical properties of rapidly stretched aluminium and aluminium-magnesium alloy. Pure aluminium (99.99% Al) and aluminium-magnesium alloy (4.65% Mg) specimens have been used in this study. The main results obtained are as follows ; (1) The yield strength and the tensile testing are larger than that in static tensile testing. The strain rate gives a remarkable effect on the resistance in deformation of pure aluminium. (2) The yield strength of aluminum-magnesium alloy in rapid tensile testing is larger than that in static tensile testing, but the tensile strength in rapid tensile testing is smaller than in static tensile testing. (3) The yield strength, the tensile strength and the hardness of rapidly pre-stretched pure aluminium are larger than those of statically pre-stretched sort. It is recognized that this fact is mainly due more to the promoted recovery by static pre-stretching at room temperature than to rapid one. (4) An interesting observation worth mentioning in the static tensile testing of the aluminium-magnesium alloy is that after a certain strain is reached the load starts to oscillate, but in the rapid tensile testing, it is not recognized. (5) The yield strength of rapidly pre-stretched aluminium-magnesium alloy is smaller than that of statically pre-streched sort, and the tensile strength of the rapidly pre-stretched is almost the same as that statically pre-stretched.
- 社団法人日本材料学会の論文
- 1966-06-15
著者
関連論文
- ねじり加工による残留応力と疲労変形
- 炭素鋼の低速捩り疲労変形に及ぼす温度の影響
- 調質圧延板における不均一形について
- 捩り加工とその恢復 : 第2報 炭素鋼の捩り応力時効処理による機械的性質の変化について
- 深絞り用薄鋼板の調質圧延質下率選定に関する一寄与
- 調質圧延軟鋼板の圧下率と残留応力とに関する一考察
- 高速引張加工された銅および銅合金の機械的性質
- 放電加工表面層について
- 捩り加工とその恢復 ; 第一報 炭素鋼の常温捩り加工による諸性質の変化について
- SUS310S鋼粗大結晶のMgCl_2溶液中における応力腐食割れ破面解析
- 深冷処理したSUS301鋼の応力腐食割れ感受性(腐食防食小特集)
- 水素チャージしたSUS304ステンレス鋼の応力腐食割れ感受性
- 209 深冷処理したSUS301鋼の応力腐食割れ感受性(応力腐食割れ)
- SUS 304 綱の応力腐食割れ感受性に及ぼす冷間加工と熱処理の影響(腐食防食小特集)
- 136 冷間加工を与えた SUS304 鋼の鋭敏化と応力腐食割れ挙動
- 深冷処理したSUS 301 鋼単結晶の応力腐食割れ
- 132 深冷処理したSUS301鋼単結晶の応力腐食割れ感受性(高温腐食・応力腐食割れ)
- SUS 301 鋼のMgCl_2溶液中における応力腐食割れの発生と伝ぱに及す環境因子の影響
- SUS301ステンレス鋼の応力腐食割れ感受性に及す加工誘起α'-マルテンサイトの影響
- 高速引張加工を与えたSUS301ステンレス鋼の応力腐食割れ感受性におよぼす電位依存性
- 高速引張加工を与えたSUS301ステンレス鋼の応力腐食割れ〔高速引張加工を与えたオ-ステナイト系ステンレス鋼の応力腐食割れに関する研究-2-〕
- 高速引張加工された18-8ステンレス鋼の疲労強度
- 金属材料の高速変形にともなう材料変化について
- 高速引張加工されたアルミニウムおよびアルミニウム-マグネシウム合金の機械的性質
- 高速引張加工されたステンレス鋼の機械的性質
- 高速変形中の金属材料の温度測定について
- 〈001〉引張軸を有する鉄単結晶の水素誘起割れと水素ぜい化
- 鉄単結晶の水素誘起割れと水素ぜい化に及ぼす冷間加工の影響
- 127 鉄単結晶の水素誘起割れにおよぼす負荷応力,冷間加工の影響(溶融金属ぜい化・水素ぜい化割れ)
- SUS304 鋼単結晶のMgCl_2 溶液中における応力腐食割れとその電位依存性
- SUS304鋼単結晶の応力腐食割れに及ぼす引張軸方位の影響(腐食防食小特集)
- 鉄の水素ぜい化に及ぼす負荷応力および冷間加工の影響
- 132 高純度フェライト系ステンレス鋼の水素ぜい化に及ぼす冷間加工の影響(応力腐食割れ)
- 131 SUS304鋼単結晶の水素ぜい化に及ぼす結晶方位の影響(応力腐食割れ)
- 129 SUS304鋼単結晶のMgCl_2溶液中における応力腐食割れ : 電位の影響(疲労微小き裂・応力腐食割れ)
- 131 SUS304鋼単結晶の応力腐食割れにおける結晶方位依存性(高温腐食・応力腐食割れ)
- 128 オーステナイト系ステンレス鋼単結晶の機械的性質におよぼす水素チャージの影響(溶融金属ぜい化・水素ぜい化割れ)
- 212 鉄の水素脆性割れに及ぼす前加工の影響(応力腐食割れ)
- 炭素鋼のねじり疲労降伏強さにおよぼすねじり加工の影響
- 高速引張加工を与えたSUS631ステンレス鋼の応力腐食割れ
- 227 二相ステンレス鋼の応力腐食割れ感受性におよぼす冷間加工の影響
- 高速引張試験機の試作と高速引張加工された炭素鋼の機械的性質
- 線材のねじり疲労変形(第1報) : 試験機の試作
- 熱処理鋼の低速ねじり疲労変形に及ぼす組織の影響
- 焼入及びその後の加熱による逆ウイデマン効果の変化について
- SUS 310 S 綱のMgCl_2溶液中における応力腐食割れ発生の電位依存性
- 205 SUS310S 鋼の MgCl_2 溶液中における応力腐食割れ破面
- 204 SUS310S 鋼の MgCl_2 溶液中における応力腐食割れ発生の電位依存性
- 高速引張加工を与えたSUS304およびSUS305ステンレス鋼の応力腐食割れ
- コイルばねの疲労変形
- 残留応力の除去条件としての加熱温度および時間について
- 炭素鋼のねじり疲労降伏強さと静的ねじり降伏強さとの関係について
- 炭素鋼焼鈍材のねじり降伏点におよぼず平均フエライトパスの影響
- ねじり強度におよぼす前加工の影響
- 逆ウイデマン効果に及ぼす二三の影響