鋳込み成形の基礎的研究(<小特集>粉体小特集)
スポンサーリンク
概要
- 論文の詳細を見る
Generally, a slip casting process is closely related to the flocculation state of particles. The present investigation was undertaken in order to understand the relationship between the flocculation state of particles and the packing structure on the surface of gypsum mold. The flocculation state of particles in AL_2O_3-slurry was discussed on the basis of rheological behavior as a function of dispersant concentration. As the result, it was found that the type of rhelogical properties was classified into three modes. For these slurries, the absorbing rate and pressure of water and the increase of packing layer thickness were measured in order to explain the packing structure on the surface of mold. From these results, it was shown that the most suitable condition for slip casting could be prepared by using a weakly flocculated slurry.
- 社団法人日本材料学会の論文
- 1987-11-15
著者
関連論文
- 不定形耐火物と粉体工学座談会
- 鋳込み成形の基礎的研究(粉体小特集)
- 微粉体の凝集構造と圧縮成形性(粉体小特集)
- オートクレーブ養生軽量気泡コンクリートの表面改質
- 半導性釉の電気的性質と微構造
- ボールミル処理による半導性粉末の調製とキャラクタリゼーション(粉体小特集)
- 半導体酸化スズ釉の微構造と電気的性質
- Al_2O_3微粉体の射出成形性に対する粒子表面改質の効果
- 新しい遠心沈降式粒度分布測定装置(粉体小特集)
- 微粉体に対するスリップキャスト法の基礎的研究
- 微粉体の圧縮成形の検討(粉体小特集)