アルミニウム円管のステンレスターゲットへの衝撃圧接 : 円管の変形が接合界面へ及ぼす影響

概要

論文の詳細を見る
A tubular aluminum projectile, subjected to a longitudinal impact, was impact-welded onto a stainless steel target using a gas gun at impact velocities of 200m/s or more. The bonding area was estimated using scanning acoustic tomograph. The microstructures and element distribution in the joint were analyzed by means of SEM and Energy dispersive X-ray spectroscopy. The bonding strength was measured by a tension test. Additionally, the experimental results were compared with the numerical one obtained using the finite element method. It appeared that the aluminum projectile was bonded to stainless steel target at the impact velocity from 200 to 300m/s. The bonding strength of aluminum/stainless steel joint showed the maximum of 190MPa at 230m/s and decreases with impact velocity. The bonding strength at the impact velocities of 220,240m/s was stronger than that of aluminum. The numerical results clearly showed that the temperature rise due to the conversion of the plastic work has influence on the profile of the projectile after deformation.
社団法人日本材料学会の論文
2001-06-15