Ni-30Cr 合金の高温クリープ抵抗に及ぼす粒界に沿った転位上析出の効果(<特集>新しい耐熱鋼)

概要

論文の詳細を見る
The high temperature creep resistance of as solution treated specimen of a Ni-30Cr alloy containing 0.04wt% carbon has been investigated by comparing with that of the specimen aged at 900℃ for 1000 h, focusing on the difference in carbide morphology. Minimum creep rate of as solution treated specimen was two orders of magnitude less than that of the aged one under higher stress levels. In as solution treated specimen crept under higher stress levels, most of grain boundaries were covered with intergranular carbides and the region consisting of fine carbides precipitated on dislocations were formed along grain boundaries. Corresponding to the formation of this region, the marked reduction in minimum creep rate occurred. Carbide precipitation on dislocation during creep was attributed to the formation of the region with high dislocation density along the grain boundaries due to the high area fraction in grain boundaries covered by carbides.
社団法人日本鉄鋼協会の論文
1990-07-01