Wetting Behavior of Sintered Nanocrystalline Powders by Armco Fe and 22CrNiMoV5-3 Steel Grade Using Sessile Drop Wettability Technique

スポンサーリンク

概要

• 論文の詳細を見る

• The wettability of sintered nanocrystalline oxide powders (CeO2, TiO2, Y3Al5O12, and ZrO2-yttria stabilized) and Al2O3 basis powder (60–70% purity) (product originated in the secondary aluminium production, composed mainly of nano and micrometric aluminium oxide) by liquid Armco Fe and by 22CrNiMoV5-3 steel grade was studied using sessile drop wettability technique. The powders were pressed and sintered under different pressures, heating rates and holding times. The later grinding and polishing surface treatments were characterized by infinite focus microscope. The wetting experiments were carried out under pure Ar atmosphere. A small piece of Armco Fe and steel grade was melted on sintered nano oxides, heating up to 1600°C with a holding time of 10 minutes for each experiment. The contact angles were measured and chemical analyses were conducted on tested samples to characterize the wetting reactions. It was found that sintered nano TiO2 not only suffered considerable wetting by Armco Fe and 22CrNiMoV5-3 steel in both cases, but also reacted with the substrate to form ilmenite and pseudobrookite. The CeO2 substrate and Armco Fe system also showed good wetting behavior. In general terms, it was concluded that wettability was affected by substrate chemical composition, and surface characteristics by sintering conditions. The preliminary results of this investigation may help to determine the suitability of the nanoparticle to be added in a liquid iron based matrix in order to influence the microstructure evolution improving mechanical properties by a fine distribution in the metallic alloy.

• 社団法人 日本鉄鋼協会の論文
• 2011-05-15

著者

• Kolbeinsen Leiv

  Department Of Materials Science & Engineering Norwegian University Of Science And Technology

• Kolbeinsen Leiv

  Department Of Material Science And Engineering Norwegian University Of Science And Technology

• Arana Jose

  Department Of Metallurgical Engineering

• Arana Jose

  Department Of Metallurgical Engineering Upv/ehu

• AMONDARAIN Zurine

  Iron and Steel Unit, Tecnalia Research and Innovation

関連論文

• Progress in the Development and Use of Grain Refiner Based on Cerium Sulfide or Titanium Compound for Carbon Steel
• Microstructure Control of Steels through Dispersoid Metallurgy Using Novel Grain Refining Alloys
• A Process Model for the Carbothermic Reduction of MnO from High Carbon Ferromanganese Slag-The Model
• Reinforcement of Austenitic Manganese Steel with (TiMo) Carbide Particles Previously Synthesized by SHS
• Kinetic of Carbothermic Reduction of MnO from High-carbon Ferromanganese Slag by Graphite Materials
• Wetting Behavior of Sintered Nanocrystalline Powders by Armco Fe and 22CrNiMoV5-3 Steel Grade Using Sessile Drop Wettability Technique

スポンサーリンク