Characterization of Slag-Metal Droplet-Gas Emulsion in Oxygen Steelmaking Converters
スポンサーリンク
概要
- 論文の詳細を見る
Metal droplets of various sizes are ejected from the jet impact zone in oxygen steel making converters. The residence time of these droplets in the surrounding gas-slag mixture is calculated for different operating conditions in top blown converters. A new dimensionless emulsion number, <I>En</I>, based on the ratio of the residence time of the metal droplets to the residence time of gas bubbles in liquid slag is proposed. This emulsion number is found to be strongly dependent on the ratio of lance height to the throat diameter of De Laval nozzle. The blowing regimes followed in three plants are analyzed in terms of emulsion number. The reduction of FeO in slag by dissolved carbon in metal droplets also depends upon emulsion number and, in turn, decides the lance height chosen at various stages of the blow as well as lime dissolution, slag formation and slopping. The emulsion number can be used as an effective tool to control slag formation behaviour.
- 社団法人 日本鉄鋼協会の論文
- 1996-06-15
著者
-
Deo Brahma
Department Of Materials And Metallurgical Engineering Indian Institute Of Technology
-
Karamcheti Arun
Department Of Materials And Metallurgical Engineering Indian Institute Of Technology
-
Singh Pankaj
Department Of Materials And Metallurgical Engineering Indian Institute Of Technology
-
PAUL Amitava
Department of Materials and Metallurgical Engineering, Indian Institute of Technology
-
CHHABRA R.
Department of Chemical Engineering, Indian Institute of Technology
-
Chhabra R.
Department Of Chemical Engineering Indian Institute Of Technology
-
Paul Amitava
Department Of Materials And Metallurgical Engineering Indian Institute Of Technology
関連論文
- Optimal Operating Conditions for the Primary End of an Integrated Steel Plant : Genetic Adaptive Search and Classical Techniques
- Cell Model for Calculation of Activities in Binary Oxide Systems
- Characterization of Slag-Metal Droplet-Gas Emulsion in Oxygen Steelmaking Converters
- Dynamic Model of Slag Foaming in Oxygen Steelmaking Converters
- Laminar Boundary Layer Heat Transfer to Power Law fluids: An Approximate Analytical Solution
- Hydrodynamic behaviour or an ensemble of encapsulated liquid drops in creeping motion : a fluid-mechanic based model for liquid membranes