Imprinting of Dull Roll Surface Texture to Carbon Steel Strips in Temper Rolling by Dry Condition

スポンサーリンク

概要

• 論文の詳細を見る

• One of the important qualities of a cold-rolled steel sheet is the surface texture, which is obtained by imprinting a dull-roll surface texture. It is controlled by actual operation data and experiences, because the mechanism of the surface imprinting has not been clarified because of the complexity of elastic–plastic deformation of the rolled sheet in temper rolling.In this paper, surface imprinting is investigated in temper rolling as dry rolling of a 4-high rolling mill. Temper rolling experiments for as-annealed low-carbon steel strips and as-annealed high-carbon steel strips were conducted in the range of 1 to 11% reductions. Electric-discharged dull rolls and shot-dull rolls were employed. Surface microstructures of temper rolled strips were observed directly, as well as surface textures in terms of the arithmetical mean deviation of the assessed profile (Ra), material ratio curves, and probability densities applied to compare the surface imprinting.As a result, the electric-discharged dull roll shows better surface imprinting than the shot-dull roll. The peak part of the roll surface is more easily imprinted on the steel sheet to form the valley part when the electric-discharged dull roll is used than when the shot-dull roll is used.

• 社団法人 日本鉄鋼協会の論文
• 2009-04-15

著者

• Shido Seiichi

  Lubricants Research Laboratory Idemitsu Kosan Co. Ltd.

• NAGASE Naoki

  Lubricants Research Laboratory, Idemitsu Kosan Co., Ltd.

• YARITA Ikuo

  Department of Mechanical Science & Engineering, Chiba Institute of Technology

• Yarita Ikuo

  Department Of Mechanical Engineering Chiba Institute Of Technology

• Nagase Naoki

  Lubricants Research Laboratory Idemitsu Kosan Co. Ltd.

関連論文

• The Effect of Soluble Lubricant on Surface Imprinting in Temper Rolling by 4 Hi Rolling Mill
• The Effect of Lubricant on Microwear of Dull Rolls in Temper Rolling by 4 Hi Rolling Mill
• Imprinting of Dull Roll Surface Texture to Carbon Steel Strips in Temper Rolling by Dry Condition
• Stress and Strain Behaviors of Mg Alloy AZ31 in Plane Strain Compression(Recent Advances in Materials and Processing (I))
• 534 Stress and Strain Analysis in Temper Rolling for Mild Steel Sheet by Elastic-Plastic Finite Element Method

スポンサーリンク