Analysis of Inclusion Core under the Weld Pool of High Strength and Lowalloy Steel
スポンサーリンク
概要
- 論文の詳細を見る
Inclusion core in the weld pool of HSLA steel was directly observed by Time Resolved X-Ray Diffraction experiments. The aluminum concentration to oxide was changed from 0.48 to 1.52 through the experiments. The corundum alumina was identified in the weld pool and the population increased as the contents of aluminum increased. The results of TRXRD experiments was related to the direct observation of inclusion by TEM analysis and the formation process of inclusion in HSLA steel was summarized in the sense of overall microstructure evolution during welding. When an aluminum content was approaching stoichiometrical value to oxygen level, the corundum alumina reacted with glassy phase and spinel-type oxide was formed after solidification process of welding.
- 社団法人 日本鉄鋼協会の論文
- 2008-12-15
著者
-
TERASAKI Hidenori
Joining and Welding Research Institute, Osaka University
-
KOMIZO Yu-ichi
Joining and Welding Research Institute, Osaka University
-
Yamada Tomonori
Graduate School of Engineering, Osaka University
-
Komizo Yu-ichi
Joining And Welding Research Institute Osaka University
-
Terasaki Hidenori
Joining And Welding Research Institute Osaka University
-
Yamada Tomonori
Graduate School Of Engineering Osaka University
-
YAMADA Tomonori
Joining and Welding Research Institute, Osaka University
-
Komizo Yu-ichi
Joining And Welding Res. Inst. Osaka Univ.
-
Terasaki Hidenori
Joining And Welding Res. Inst. Osaka Univ.
関連論文
- Relation between Inclusion Surface and Acicular Ferrite in Low Carbon Low Alloy Steel Weld
- STUDY ON QUALIFICATION OF GMAW WELDING FAULTS BASED ON THE DIGITAL SIGNAL
- Effect of Anode Heat Transfer on Melted Penetration in Welding Process by Free-burning Argon Arc
- Relation between Inclusion Surface and Acicular Ferrite in Low Carbon Low Alloy Steel Weld
- Analysis of Inclusion Core under the Weld Pool of High Strength and Lowalloy Steel
- In-Situ Observation for Weld Solidification in Stainless Steels Using Time-Resolved X-ray Diffraction
- Development of Titanium Weld Metal Reinforced by Titanium Mono-boride
- 418 Direct observation of solidification process in gas tungsten arc welding of steels(4th JWS-KWJS Young Reseacher Symposlum)
- Two-Dimensional Time-Resolved X-ray Diffraction Study of Directional Solidification in Steels
- Analysis of Primary Weld Solidification in Stainless Steel using X-ray Diffraction with Synchrotron Radiation(Materials, Metallurgy & Weldability)
- Nucleation of Bainite at Small Angle Dislocation Network in Austenite and Its Effects on Mechanical Properties in Steels
- Microstructure Control of Titanium Weld by Addition of Boron
- In-situ Observation of Solidification Behavior of 14Cr-Ni Steel Weld
- Lattice Misfit between Inclusion and Acicular Ferrite in Weld Metal of Low Carbon Low Alloy Steel
- Solidification cracking susceptibility of alloy tool steel under rapid solidification
- In-situ Observation of Microstructure Evolution in Heat-Affected-Zone of Ti-Killed Steel Weld
- Experimental Determination of Elastic Modulus during Martensitic Transformation of Low Transformation Temperature Steel
- Variant Selection of Low Carbon High Alloy Steel in an Austenite Grain during Martensite Transformation