Dynamic Recrystallization Behavior in Hypereutectoid Steels with Different Carbon Content
スポンサーリンク
概要
- 論文の詳細を見る
The dynamic recrystallization behavior in hypereutectoid steels with different carbon content was determined by hot compression testing. Compression tests were performed using single hit schedules between 800 to 1050°C, strain rates of 0.01 to 1 s−1. It was found that the critical stress for the start of dynamic recrystallization is almost same as the steady state stress. The results also revealed that the carbon content has no effect on the activation energy of deformation.
- 社団法人 日本鉄鋼協会の論文
- 2007-11-15
著者
-
Elwazri A.
Department Of Metals And Materials Engineering Mcgill University
-
Elwazri A.
Department Of Mining Metals And Materials Engineering Mcgill University
-
Yue S.
Department Of Metals And Materials Engineering Mcgill University
-
Yue S.
Department Of Mining Metals And Materials Engineering Mcgill University
-
BAE C.
Wire Rod Research Group, Technical Research Laboratories POSCO
-
LEE D.
Wire Rod Research Group, Technical Research Laboratories POSCO
-
Bae C.
Wire Rod Research Group Technical Research Laboratories Posco
-
Yue S.
Department Of Metallurgical Engineering Mcgill University
-
Lee D.
Wire Rod Research Group Technical Research Laboratories Posco
関連論文
- The Effect of Thermal History on the Hot Ductility of Microalloyed Steels
- Hot Deformation Characteristics of Si-Mn TRIP Steels with and without Nb Microalloy Additions
- Kinetics of metadynamic recrystallization in microalloyed hypereutectoid steels
- Metadynamic and Static Recrystallization of Hypereutectoid Steel
- The Influence of Bainite on Retained Austenite Characteristics in Si-Mn TRIP Steels
- The Kinetics of Static Recrystallization in Microalloyed Hypereutectoid Steels
- The Influence of Martensite on Line Broadening in Neutron Diffraction Spectra of a DP Steel
- Static Recrystallization of Nb and Nb-B Steels under Continuous Cooling Conditions
- Dynamic Recrystallization Behavior in Hypereutectoid Steels with Different Carbon Content
- Ferrite Formation Characteristics in Si-Mn TRIP Steels