Basis for Systematic Hydrodynamic Analysis of a Multi-strand Tundish
スポンサーリンク
概要
- 論文の詳細を見る
Despite significant work done till date on single/dual strand tundish (those applied to slab casting) not much information on an equivalent multi-strand tundish (which are of significance to billet casting) is available regarding residence time distribution (RTD) measurements and its analysis. The proportions of various flow volumes estimation (e.g., dead, plug, well mixed, etc.) on the basis of a single/dual strand tundish cannot be directly extrapolated to a multi-strand tundish from its individual strand data only. In the present study, therefore, the principle and the methodology underlying the derivation for concentration vs. time curves (C curves) of a multi-strand tundish is addressed to provide a basis for the evaluation of RTD parameters. To this end, several experiments in a four-strand water model tundish were carried out for RTD measurements and estimation of associated flow volumes. The tracer dispersion experiments were performed by injecting potassium chloride (20 mL solution) as a pulse into the submerged inlet stream and the variation of conductivity of water caused by the differential mixing of the injected tracer into the bath were recorded continuously at the exits of the water model tundish with a 75 L volume. These conductivity values of individual strands were converted into corresponding concentrations, and the dimensionless concentrations were plotted against dimensionless time to derive the characteristic C curves. The individual C curves effect the strand to strand variations whereas the overall C curve (average of individual C curves) is used to determine the flow volumes in a multi-strand tundish system.
- 社団法人 日本鉄鋼協会の論文
- 2007-11-15
著者
-
Kumar A
Steelmaking And Casting Res. Group Res. And Dev. Div. Tata Steel
-
Mazumdar Dipak
Department of Materials Science and Engineering, Indian Institute of Technology
-
Mazumdar D
Indian Inst. Of Technol. Kanpur Ind
-
Mazumdar Dipak
Department Of Materials & Metallurgical Engineering Indian Institute Of Technology
-
KORIA Satish
Department of Materials & Metallurgical Engineering, Indian Institute of technology
-
Koria S
Department Of Materials And Metallurgical Engineering Indian Institute Of Technology
-
KUMAR Anil
Steelmaking and Casting Research Group, Research and Development Division, Tata Steel
関連論文
- Mixing Models for Slag Covered, Argon Stirred Ladles
- An Assessment of Fluid Flow Modelling and Residence Time Distribution Phenomena in Steelmaking Tundish Systems
- Transient Flow and Mixing in Steelmaking Ladles during the Initial Period of Gas Stirring
- Modeling of Fluid Flow and Residence Time Distribution in a Four-strand Tundish for Enhancing Inclusion Removal
- Basis for Systematic Hydrodynamic Analysis of a Multi-strand Tundish
- A Comparative Study of Mixing Phenomena in Gas Stirred Ladle Systems
- Mathematical Modeling and Validation of Wall Shear Stress in Gas Stirred Vessels
- Mixing Models for Slag Covered, Argon Stirred Ladles
- Modeling of Slag Eye Area in Argon Stirred Ladles
- Impact of Ladle Design on Bath Mixing
- The Physical and Mathematical Modelling of Continuous Casting Tundish Systems
- DImensional Analysis and Mixing Phenomena in Bubble Stirred Ladles
- The Physical and Mathematical Modelling of Gas Stirred Ladle Systems.
- Comparison of Several Numerical Prediction Methods for Thermal Fields during Phase Transformation of Plain Carbon Steels.
- Experimental investigations on the design of gas injecting lances.