Modeling of the Helium-Heated Steam Reformer for HTR-10
スポンサーリンク
概要
- 論文の詳細を見る
In this study, based on the pseudo-homogeneous one-dimensional model, a steady-state model of the helium-heated steam reformer planned to be connected with the 10 MW high temperature gas cooled reactor (HTR-10) has been developed. Good agreement is shown between the simulating results and experimental data. The influence of main process parameters on the performance with respect to the methane conversion and the hydrogen yield is investigated and discussed. The performance increases remarkably with the increase in the inlet helium temperature when it is lower than 1,000°C. Whereas, the effect becomes weak when the temperature is higher than 1,000°C. The influence of the inlet helium flow rate is not as evident as that of the temperature. The inlet helium pressure and inlet process gas temperature have almost no influence on the performance. The performance increases with the decrease in the inlet process gas pressure. The influence of the inlet process gas flow rate and steam-to-carbon ratio (S/C) is complicated. Optimal values should be chosen for them to obtain a high performance.
- 一般社団法人 日本原子力学会の論文
- 2007-07-25
著者
-
Zhang Youjie
Advanced Reactor Engineering And Safety Key Laboratory Of Moe Of China Institute Of Nuclear And New
-
Ju Huaiming
Advanced Reactor Engineering And Safety Key Laboratory Of Moe Of China Institute Of Nuclear And New
-
Jiang Shengyao
Advanced Reactor Engineering And Safety Key Laboratory Of Moe Of China Institute Of Nuclear And New
-
YIN Huaqiang
Advanced Reactor Engineering and Safety, Key Laboratory of MOE of China, Institute of Nuclear and Ne
-
Yin Huaqiang
Advanced Reactor Engineering And Safety Key Laboratory Of Moe Of China Institute Of Nuclear And New
関連論文
- Modeling of the Helium-Heated Steam Reformer for HTR-10
- Thermodynamic Analysis of Thermal Efficiency of HTR-10 Hydrogen Production System