Influence of Shielding Gas Composition and Welding Parameters on the N-content and Corrosion Properties of Welds in N-alloyed Stainless Steel Grades

概要

論文の詳細を見る
TIG welding using different heat inputs, arc lengths and shielding gas nitrogen contents was performed. The aim was to evaluate the possibilities to avoid nitrogen losses on welding or even increase the weld metal nitrogen content and thereby improve the corrosion properties and, in the case of duplex grades, also to improve the phase balance. Three different nitrogen-alloyed duplex grades and one superaustenitic grade were investigated. The corrosion resistance in terms of CPT, Critical Pitting Temperatue, of the super duplex material was found to be strongly correlated to the nitrogen content of the weld metal. In the case of the superaustenitic weld metal, the increased nitrogen content was found to be associated with an increased pore formation, leading to a lower corrosion resistance and thereby masking the positive effect of the increased introgen content. In order to illuminate the nitrogen exchange reactions between the arc, weld pool, and shielding gas, stationary weld experiments were also performed. The results from these stationary trials indicated that the net weld pool nitrogen content could be qualitatively understood if the various fluxes involved in the nitrogen transport between the plasma arc, weld pool and weld pool-shielding gas were considered. At short times the weld pool was limited in area and the nitrogen content of the weld pool increased due to high nitrogen activity in the arc. At longer times the nitrogen escaped from the weld pool to the shielding gas. This flux became then the dominating factor due to the increased weld pool area exposed to the shielding gas. The situation then approached the equilibrium conditions that were expected from the gas nitrogen activity and weld pool alloy composition according to thermodynamic calculations using the Thermo-Calc database.
社団法人日本鉄鋼協会の論文
1996-07-15

Influence of Shielding Gas Composition and Welding Parameters on the N-content and Corrosion Properties of Welds in N-alloyed Stainless Steel Grades

スポンサーリンク

概要

著者

関連論文

スポンサーリンク