Real-time Analysis on Non-uniform Heat Transfer and Solidification in Mould of Continuous Casting Round Billets

スポンサーリンク

概要

• 論文の詳細を見る

• It is very important to obtain the temperature and heat flux distribution in the mould which can reflect the nonuniformity along circumferential direction and the changes of practical operation parameters for visualization of continuous casting process, on-line monitoring of strand quality and precise prediction of abnormality. In this paper, based on the data of continuous monitoring temperature in round billet casting machine, an inverse problem algorithm is applied to study the 3D heat flux field and the real 3D shell thickness profile in the mould which can reflect the nonuniformity of heat transfer along circumferential direction in normal production. The results indicate that under the course of normal production, the mould heat flux and shell thickness are various along the circumferential direction, and are influenced by the installation conditions of mould in caster. A “high heat flow region” occurs in the area 80-130 mm below meniscus, where the heat flux is obviously higher and more nonuniform than that in the area in middle and lower part of the mould. The heat flux profile along circumferential direction in the “high heat flow region” determines the profiles of shell thickness at different heights below meniscus to some extent, both of them have similar profiles, this provides theoretical basis for improving the billet surface quality and getting uniform shell thickness by analyzing and monitoring heat flux distribution in the mould especially in the “high heat flow region”.

• 社団法人 日本鉄鋼協会の論文
• 2004-10-15

著者

• Man Yao

  Department Of Material Engineering Dalian University Of Technology

• Dacheng Fang

  Department Of Material Engineering Dalian University Of Technology

• HEBI Yin

  Department of Material Engineering, Dalian University of Technology

• Hebi Yin

  Department Of Material Engineering Dalian University Of Technology

• HEBI Yin

  Student, Department of Material Engineering, Dalian University of Technology

関連論文

• 3D Stress Model with Friction in and of Mould for Round Billet Continuous Casting
• 3-D Inverse Problem Continuous Model for Thermal Behavior of Mould Process Based on the Temperature Measurements in Plant Trial
• Real-time Analysis on Non-uniform Heat Transfer and Solidification in Mould of Continuous Casting Round Billets

スポンサーリンク