Identification for Monitoring and Autotuning of PID Controllers

スポンサーリンク

概要

• 論文の詳細を見る

• The PID controllers of single loop systems are, in general, designed according to FOPDT or SOPDT models which represent the dynamics of open-loop processes. An identification system, which aims to identify such low order models for monitoring and autotuning of PID controllers, is presented. The identification is conducted by compensating the output of the relay feedback loop with a simple compensator laying outside the loop. The objective is to make the compensated output behave like the one from a process consisting of an integrator plus dead time. An on-line mechanism to adjust the compensator is presented, which will lead to the final apparent model. Meanwhile, the optimal performances of PID control associated with low order dynamics are tabulated. Based on the identified model, the performance of the system can thus be assessed. As the identification is implemented in parallel to a relay feedback loop, it is thus feasible for on-line use to monitor the performance of a PID controller in the system. From the control assessment, the control performance can be improved by an autotuning procedure.

• Society of Chemical Engineersの論文
• 2003-03-01

著者

• Jeng J‐c

  National Taiwan Univ. Taipei Twn

• Huang Hsiao-ping

  Department Of Chemical Engineering National Taiwan University

• Jeng Jyh-cheng

  Department Of Chemical Engineering National Taiwan University

関連論文

• Plant-Wide Control of a Complete Ethyl Acetate Reactive Distillation Process
• Identification and Controller Design for Nonlinear Processes Using Relay Feedback
• Bifurcation in the Reactive Distillation for Ethyl Acetate at Lower Murphree Plate Efficiency
• Identification of Wiener Model Using Relay Feedback Test
• Design of a Complete Ethyl Acetate Reactive Distillation System
• Multi-Loop PID Controllers Design for MIMO Processes Containing Integrator(s)
• Model Building by Merging Submodels Using PLSR
• A Wavelet Enhanced Integral Approach to Linear Dynamic Data Reconciliation
• Auto-Tuning of PID Controllers for Second Order Unstable Process Having Dead Time
• Structure ldentification for Block-Oriented Nonlinear Models Ushing Relay Feedback Tests
• Tuning of PI/PID Controllers Based on Specification on Maximum Closed-Loop Amplitude Ratio
• Identification for Monitoring and Autotuning of PID Controllers

もっと見る 閉じる

スポンサーリンク