The Influence of Solute Carbon in Cold-rolled Steels on Shear Band Formation and Recrystallization Texture

スポンサーリンク

概要

• 論文の詳細を見る

• Two experiments were conducted to clarify the roles of grain size, solute carbon and strain in determining the recrystallization textures of cold-rolled and annealed steels. In the first experiment, samples of coarse-grained low-carbon (LC) and interstitial-free (IF) steels were cold-rolled to a 75% reduction in thickness. One sample from each steel was polished and cold-rolled an additional 5%, while the remaining samples were annealed for various times at 650°C. In the second experiment, three samples from a commercial LC steel sheet were rolled 70% at 300°C. Two of the samples were given a further rolling reduction of 5% of the original thickness, with one of the samples being given this additional reduction at 300°C and the other at room temperature. Goss recrystallization textures are strengthened by coarse initial grain sizes, the presence of solute carbon and rolling at a temperature where dynamic strain ageing occurs, but are weakened by additional rolling beyond a reduction of 70%, especially when this extra rolling is conducted at a temperature where dynamic strain ageing does not occur. Characterization of key features of the deformed and recrystallized steels using optical microscopy, scanning electron microscopy (SEM) and electron back-scatter diffraction (EBSD) supports a rationale for these effects based on the repeated activation and deactivation of shear bands and the influence of solute carbon and dynamic strain ageing on the operating life of the bands and the accumulation of strain within them.

• 社団法人 日本鉄鋼協会の論文
• 2004-06-15

著者

• Barnett Matthew

  School Of Engineering And Technology Deakin University

• Beladi H

  School Of Engineering And Technology Deakin University

• Beladi Hossein

  School Of Engineering And Technology Deakin University

• Nave Mark

  School Of Engineering And Technology Deakin University

関連論文

• Fragmentation of Orientation within Grains of a Cold-rolled Interstitial-free Steel
• An Analysis of the Transition between Strain Dependent and Independent Softening in Austenite
• Generating Misorientations in Shear Deformation Structures
• The Influence of Solute Carbon in Cold-rolled Steels on Shear Band Formation and Recrystallization Texture
• Quenched and Annealed Microstructures of Hot Worked Magnesium AZ31
• Formation of Ultrafine Grained Structure in Plain Carbon Steels Through Thermomechanical Processing
• The Effect of Aluminium Content on the Mechanical Properties and Microstructure of Die Cast Binary Magnesium-Aluminium Alloys

スポンサーリンク