Transport Mechanism of Thermohydraulic Instability in Natural Circulation Boiling Water Reactors during Startup

概要

論文の詳細を見る
This paper presents experimental study on transport mechanism of thermohydraulic instability, which may occur in natural circulation boiling water reactor during startup. The research was carried out using a natural circulation experimental loop featuring twin parallel boiling channels with chimney assembly. The experiments were performed with the pressure range of 0.1 to 0.7 MPa and maximum heat flux of 577 kW/m2. The objective of the study is to formulate thermohydraulic stability maps required for determining rational startup procedure of the reactor, in which the instability could be prevented. The study clarified that the flow modes during startup consist of the following sequence: (1) single-phase flow, (2) geysering, (3) oscillation due to hydrostatic head fluctuation, (4) density wave oscillation, (5) transition oscillation, and (6) stable two-phase flow. The main findings of the experiments are as follows: First, low amplitude geysering still occurs at 0.7 MPa under lower heat flux and high inlet subcooling. Second, stable two-phase natural circulation is achieved with system pressure as low as 0.2 MPa, under medium heat flux, and subcooling lower than 5 K. Third, oscillation due to hydrostatic head fluctuation only occurs under atmospheric condition. Finally, thermohydraulic stability maps and rational startup procedure are formulated.
社団法人日本原子力学会の論文
2003-11-25