ディスク型熱磁気エンジンの基本特性
スポンサーリンク
概要
- 論文の詳細を見る
This paper is described on the fundamental performance of the disc type thermomagnetic engine. The disc type engine has been designed in order to decrease the eddy current braking loss. The performance characteristics such as power, torque and loss has been measured, and compared with that of the cylindrical engine in the condition of the same volume of the temperature sensitive magnetic material. The eddy current braking loss is 0.04W which corresponds to 1/30 the loss in the cylindrical engine at the rotation speed of 0.4rps with the maximum power output. The total loss including partial losses due to the friction, the hydraulic effect and the eddy current braking is 0.9W in the disc type engine and is 1.8W in the cylindrical engine. The total loss in the disc type engine is reduced to be 50% of the value of the total loss in the cylindrical engine at the same condition mentioned above. The maximum output power is 6.0W at the rotation speed of 0.4rps in the disc type engine which is about 1.6 times larger than that of the cylindrical engine. The eddy current braking loss in the disc type engine is 0.7% of the value of the maximum output power, which is negligible effect in this engine. The power per unit volume of disc has the maximum value at the disc width of 40mm. The clearance between discs is decided to be of 1mm due to keeping the working fluid flow condition at a constant. The rotor thickness includes with the clearance and the disc thickness. The power per unit rotor thickness also has the maximum value at the disc thickness of 0.5mm. The thermomagnetic engine with the optimum condition can be designed by using these results. When the permanent magnet fixes the size constant, the disc type engine generates high output power in comparison with the cylindrical engine at the point of effective use of magnetic field.
- 社団法人 電気学会の論文
- 2003-07-01
著者
-
西川 雅弘
大阪大学大学院工学研究科
-
西川 雅弘
大阪大学工学研究科 電気電子情報工学専攻
-
西川 雅弘
阪大
-
高橋 豊
大阪大学大学院工学研究科
-
松沢 智広
大阪大学大学院工学研究科電子情報エネルギー工学専攻
-
高橋 豊
大阪大学大学院
-
西川 雅弘
大阪大 大学院工学研究科
-
西川 雅弘
大阪大学大学院
関連論文
- レーザー核融合炉液体壁チェンバー設計のためのアブレーションのシミュレーション
- 30aUC-8 高速点火レーザー核融合炉チェンバー液体壁のアブレーションのシミュレーション(核融合(不安定性/輸送・閉じ込め特性/その他),30aUC プラズマ宇宙物理,領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 渦電流を利用した受動型磁気軸受に発生するブレーキトルクの抑制
- 補助磁石を取り付けた受動型磁気軸受の復元力およびブレーキトルク特性
- レーザー核融合炉固体壁の熱的応答に関する研究
- レーザー核融合炉チェンバー液体第一壁の核融合エネルギーによるアブレーション量と温度変化の評価
- 23aB04 タングステン第一壁上の炭素混合層の形成メカニズム(真空・第一壁, (社) プラズマ・核融合学会第21回年会)
- 25aB26P 水素・炭素混合イオンビーム照射によるタングステン材表面上の混合層の成長(真空・第一壁・材料,炉設計)
- 25aB03 水素・炭素混合ビーム照射によるWのブリスタリング : 結晶組織依存性(真空・第一壁・材料)
- Blister Formation on Tungsten Surface by Irradiating Hydrogen and Carbon Mixed Ion Beam