Mechanical Energy Generation during High Burnup Fuel Failure under Reactivity Initiated Accident Conditions
スポンサーリンク
概要
- 論文の詳細を見る
The dominant factor of mechanical energy generation during high burnup fuel failure under reactivity initiated accident (RIA) conditions is discussed on the basis of results from recent two RIA-simulating tests with burnup fuel rods and separate-effect tests with powder fuels. When cladding failed during the RIA conditions, solid fuel fragments were dispersed into the coolant water. The results from the recent two burnup fuel experiments indicated that the dominant factor of mechanical energy generation was thermal interaction of dispersed fuel fragments with the coolant water. To eliminate the effect of gas release from the fuel rod, and to evaluate the potential of the thermal interaction, powder fuel experiments were also performed as separate-effect tests. The results showed consistency in the mechanical energy generation process between the burnup fuel experiments and the powder fuel experiments. Accordingly, thermal interaction should be the dominant factor of the mechanical energy generation. Concerning the conversion ratio from thermal to mechanical energy, the finer fuel particles generated more mechanical energy at the same energy deposition level.
- 社団法人 日本原子力学会の論文
- 2000-10-25
著者
-
Fuketa Toyoshi
Department Of Reactor Safety Research Japan Atomic Energy Research Institute
-
SUGIYAMA Tomoyuki
Department of Reactor Safety Research, Japan Atomic Energy Research Institute
-
Sugiyama Tomoyuki
Department Of Reactor Safety Research Japan Atomic Energy Research Institute
-
SUGIYAMA Tomoyuki
Department of Mechanical Engineering and Science, Tokyo Institute of Technology
関連論文
- Fission Gas Release in Irradiated UO_2 Fuel at Burnup of 45GWd/t during Simulated Reactivity Initiated Accident (RIA) Condition
- Mechanical Energy Generation during High Burnup Fuel Failure under Reactivity Initiated Accident Conditions
- Effect of Absorbed Hydrogen on the Stress Corrosion Cracking (SCC) Susceptibility of Unirradiated Zircaloy Cladding
- Inversion Mechanism of Joule-Thomson Effect