Smelting Reduction Process with a Coke Packed Bed for Steelmaking Dust Recycling
スポンサーリンク
概要
- 論文の詳細を見る
A new smelting reduction process with a coke packed bed has been developed for iron, chromium, and nickel recovery from BOF dust, and for simultaneous recovery of zinc and iron from the electric arc furnace dust. The process is characterized by direct use of fine raw materials without agglomeration, recovery of almost the whole amount of zinc and lead, and no emission of secondary waste, compared with the conventional recovery methods.The commercial plant for BOF dust recycling has been operating stably with a metal production capacity of 200 tons per day. The blast condition is controlled so that the temperature at the lower tuyere level becomes higher than 1550°C, which is the condition required for the smelting reduction of chromium and iron oxides.The validity of the process idea for EAF dust recycling was confirmed and the key technologies were established through the pilot plant tests with a scale of 10 tons per day. It was found that zinc oxide was almost completely reduced and vaporized at the thermal state of the furnace, <I>T</I>melt≥1550°C, which allowed chromium and iron to be reduced. The control of the temperature and CO2/CO ratio of the top gas was important for the prevention of zinc adhesion on the wall of the furnace top.
- 社団法人 日本鉄鋼協会の論文
- 2000-03-15
著者
-
Hara Yoshiaki
Technical Research Laboratories Kawasaki Steel Corporation
-
Matsumoto Toshiyuki
Chiba Works Kawasaki Steel Corporation
-
ISHIWATA Natsuo
Technical Research Laboratories, Kawasaki Steel Corporation
-
ITAYA Hiroshi
Technical Research Laboratories, Kawasaki Steel Corporation
-
Itaya H
Kawasaki Steel Corp. Chiba