Recrystallization-Transformation Combined Reactions during Annealing of a Cold Rolled Ferritic-Austenitic Duplex Stainless Steel
スポンサーリンク
概要
- 論文の詳細を見る
Solid state reactions taking place during annealing of 20% cold rolled ferrite–austenite duplex stainless steel (DIN W.-Nr: 1.4462) have been studied by means of several complementary techniques: optical, scanning and transmission electron microscopy, X-ray diffraction analysis, microhardness and ultramicrohardness measurements and magnetic phase detection (ferritoscope). It has been found that after cold rolling austenite exhibited more strain hardening and a higher driving force for recrystallization than ferrite. Extensive recovery took place in ferrite during annealing, while the deformation substructure of austenite remained nearly unrecovered until beginning of recrystallization. The recrystallization kinetics in ferrite was faster than in austenite. Recrystallization in austenite occurred in a more discontinuous manner than in ferrite. The eutectoid transformation of ferrite to sigma phase plus austenite slowed down recrystallization kinetics of both ferrite and austenite phases. A scheme is presented for sigma phase formation during recrystallization annealing.
- 社団法人 日本鉄鋼協会の論文
- 1998-06-15
著者
-
Padilha A
Univ. Sao Paulo Sao Paulo Bra
-
Padilha Angelo
Departamento De Engenharia Metalurgica E De Materiais Escola Politecnica Universidade De Sao Paulo
-
REICK Wolfgang
Department of Mechanical Engineering, University of Sao Paulo
-
POHL Michael
Institute for Materials, Faculty of Mechanical Engineering, Ruhr-University
-
Pohl Michael
Institute For Materials Faculty Of Mechanical Engineering Ruhr-university
-
Reick Wolfgang
Department Of Mechanical Engineering University Of Sao Paulo
関連論文
- Cold Swaging, Recovery and Recrystallization of Oligocrystalline INCOLOY MA 956-Part II : Annealed State
- Cold Swaging, Recovery and Recrystallization of Oligocrystalline INCOLOY MA 956-Part I : Deformed State
- Effect of Carbon on the Cold-worked State and Annealing Behavior of Two 18wt%Cr-8wt%Ni Austenitic Stainless Steels
- Annealing of Cold-worked Austenitic Stainless Steels
- Recrystallization-Transformation Combined Reactions during Annealing of a Cold Rolled Ferritic-Austenitic Duplex Stainless Steel
- Separation of Static Recrystallization and Reverse Transformation of Deformation-induced Martensite in an Austenitic Stainless Steel by Calorimetric Measurements
- Aging Behaviour of 25Cr-17Mn High Nitrogen Duplex Stainless Steel