Development of Simplified Wave-type Vane in BWR Steam Dryer and Assessment of Vane Droplet Removal Characteristics

概要

論文の詳細を見る
Air-water experiments were performed for the BWR steam dryer in order to elucidate droplet removal characteristics of the vane. Based on the results, a simplified vane was developed and its droplet removal characteristics were confirmed by air-water experiments using a whole dryer model. Phase-Doppler anemometer was used to measure droplet diameter distributions. In the experiments of the current vane with four-wave stages and 120° bend angle, almost all of the droplets were found to be trapped in the first and second vane stages. For the air velocity of 3.1 m/s, 90% of the inlet droplets were trapped there and 4% were trapped in the third and fourth stages, resulting in 6% being carried over. Sauter mean diameters at the exit were 6 and 5 μm while at the inlet they were 71 and 64 μm for the respective air velocities of 1 and 3 m/s. Based on the Weber number evaluation, the possible mechanism for the fine droplet generation was considered to be the breakup of droplets due to impingement on the liquid film formed in the vane surface. From the above results, the simplified vane with two-wave stages was developed. In order to remove fine droplets, the bend angle of the vane was reduced to 90°, in which a larger inertia force is exerted on finer droplets generated by breakup. Experiments for the whole dryer model showed that the developed vane could achieve the same droplet removal characteristics as the current vane without increasing the pressure drop of the dryer. A design having ten dryer bank rows and 1.2 m height, which is 0.8 m shorter than the current dryer, is possible for the dryer using the new simplified vane.
社団法人日本原子力学会の論文
1999-05-25

Development of Simplified Wave-type Vane in BWR Steam Dryer and Assessment of Vane Droplet Removal Characteristics

スポンサーリンク

概要

著者

関連論文

スポンサーリンク