IGUCHI Manabu | Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
スポンサーリンク
概要
- Iguchi Manabuの詳細を見る
- 同名の論文著者
- Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido Universityの論文著者
関連著者
-
IGUCHI Manabu
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Iguchi Manabu
Division Of Material Science And Engineering Graduate School Of Engineering Hokkaido University
-
Iguchi Manabu
Div. Of Materials Sci. And Engineering Graduate School Of Engineering Hokkaido Univ.
-
Iguchi M
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Iguchi Manabu
Department Of Mechanical Engineering Fukui University
-
Iguchi Manabu
Hokkaido Univ. Sapporo Jpn
-
Iguchi Manabu
Graduate School Of Engineering Hokkaido University
-
Iguchi Manabu
Hokkaido Univ. Hokkaido Jpn
-
Iguchi Manabu
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Sasaki Yasushi
Graduate Inst. Of Ferrous Technol. (gift) Pohang Univ. Of Sci. And Technol. (postech)
-
YOKOYA Shinichiro
Department of Mechanical Engineering, Nippon Institute of Technology
-
Yokoya Shinichiro
Department Of Mechanical Engineering Nippon Institute Of Technology
-
IGUCHI Daisuke
Hokkaido University
-
Takagi S
Department Of Mechanical Engineering Nippon Institute Of Technology
-
Takagi Shigeo
Department Of Mechanical Engineering Nippon Institute Of Technology
-
Takagi S
Department Of Mechanical Engineering Nihon Institute Of Technology
-
IGUCHI Manabu
Graduate School of Engineering, Hokkaido University
-
Sasaki Yasushi
Department of Cardiology, Takashima General Hospital
-
IGUCHI Daisuke
Graduate School of Engineering, Hokkaido University
-
OHMI Tatsuya
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Hara Shigeta
Fukui Univ. Technol. Fukui Jpn
-
TAKAGI Shigeo
Department of Mechanical Engineering, Nihon Institute of Technology
-
Ohmi Tatsuya
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Takagi Shigeo
Department Of Electrical Engineering Faculty Of Engneering Shizuoka University
-
Sasaki Yasushi
Graduate Institute of Ferrous Technology (GIFT), Pohang University of Science and Technology (POSTEC
-
SASAKI Yasushi
Grad Sch. of Eng., Tohoku Univ.
-
Sasaki Yasushi
Graduate School Of Engineering Tohoku University
-
Sasaki Y
Pohang Univ. Sci. And Technol. Pohang Kor
-
Sasaki Yasushi
Graduate School Of Engineering Hokkaido University
-
MARUKAWA Katsukiyo
Sumitomo Metal Industries, Ltd
-
Hino Mitsutaka
Department of Metallurgy, Graduate School of Engineering, Tohoku University
-
Ohmi T
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ohmi Tatsuya
Hokkaido Univ. Sapporo Jpn
-
Sasaki Y
Graduate School Of Engineering Tohoku University
-
Marukawa K
Center For Advanced Science And Innovation Osaka University
-
Marukawa Katsukiyo
Cooperative Research Center Advanced Science & Technology Osaka University
-
HARA Shigeta
Department of Materials Science and Processing, Graduate School of Engineering, Osaka University
-
SHITARA Moriyoshi
Huens Co. Ltd.
-
Hara Shigeta
Department Of Materials Science And Processing Graduate School Of Engineering Osaka University
-
KIUCHI Hiromichi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Kiuchi Hiromichi
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ishii K
Div. Of Materials Sci. Graduate School Of Engineering Hokkaido Univ.
-
Ishii K
Graduate School Of Engineering Hokkaido University
-
Ishii K
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ishii K
Hokkaido University
-
Joenson P
Div. Of Metallurgy Royal Institute Of Technology
-
Joensson P
Division Of Applied Process Metallurgy Kth
-
Joensson Paer
Div. Of Applied Process Metallurgy Royal Inst. Of Technol.
-
HARA Sigeta
Department of Materials Science and Processing, Osaka University
-
Tilliander Anders
Division of Applied Process Metallurgy, Royal Institute of Technology
-
Jönsson Pär
Division of Applied Process Metallurgy, Royal Institute of Technology
-
TAMAMORI Taku
Huens Co. Ltd.
-
HINO Mitsutaka
Graduate School of Engineering, Tohoku University
-
ISHII Kuniyoshi
Graduate School of Engineering, Hokkaido University
-
Hino Mitsutaka
Dep. Of Metallurgy Graduate School Of Engineering Tohoku Univ.
-
Hino Mitsutaka
Department Of Metallurgy Faculty Of Engineering Tohoku University
-
KUMAGAI Takehiko
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Ishii Kuniyoshi
Graduate School Of Engineering Hokkaido University
-
Kumagai Takehiko
Division Of Maetrials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Iguchi Manabu
Faculty Of Engineering Hokkaido University
-
Tilliander Anders
Division Of Applied Process Metallurgy Kth
-
浅古 豊
日産自動車
-
Kagawa Tsuyoshi
Graduate Student Graduate School Of Engineering Hokkaido University
-
TAKAHASHI Koya
Graduate School of Engineering, Hokkaido University
-
SASAKI Kiyoto
Graduate Student, Graduate School of Engineering, Hokkaido University
-
KAWABATA Hirotoshi
Graduate School of Engineering, Osaka University
-
YOKOYA Shin-ichiro
Department of Machanical Engineering, Nippon Institute of Technology
-
TAKAGI Sigeo
Department of Mechanical Engineering, Nippon Institute of Technology
-
ASAKO Yutaka
Department of Mechanical Engineering, Tokyo Metropolitan University
-
UEDA Yoshiaki
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Shitara Moriyoshi
Graduate School of Engineering, Hokkaido University
-
IGUCHI Daisuke
Visiting Researcher, Graduate School of Engineering, Hokkaido University
-
SASAKI Yasushi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
YOSHIDA Jin
Innovation Plaza Hokkaido, Japan Science and Technology Agency
-
BAHGAT M.
Graduate School of Engineering, Hokkaido University
-
ISHII Kuniyoshi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Kawabata Hirotoshi
Graduate School Of Engineering Osaka University
-
Kiuchi H
Hokkaido Univ. Sapporo Jpn
-
Bahgat M
北大 工
-
Yoshida Jin
Senior Researcher Innovation Plaza Hokkaido Japan Science And Technology Agency
-
Ueda Yoshiaki
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ueda Yoshiaki
Hokkaido Univ. Hokkaido Jpn
-
Ueda Yoshiaki
Division Of Cardiovascular And Respiratory Medicine Department Of Internal Medicine Kobe University
-
Yamashita Shintaro
Graduate School Of Engineering Hokkaido University
-
TSUJINO Ryoji
Department of Mechanical Engineering, Setsunan University
-
NASUKAWA Youhei
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
FUJIKAWA Tosihide
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Fujikawa Tosihide
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
SAKAMOTO Mitsuru
Graduate Student, Osaka University
-
SOUMA Hiroki
Nippon Wiper Blade Co., Ltd.
-
Ternstedt Patrik
Division of Applied Process Metallurgy, Royal Institute of Technology
-
Zhang Zhi
Department of Materials Science and Engineering, Royal Institute of Technology
-
Tilliander Anders
Department of Materials Science and Engineering, Royal Institute of Technology
-
Takahashi Yusuke
Graduate Student, Graduate School of Engineering, Hokkaido University
-
Kasai Norifumi
Kashima Steel Works, Sumitomo Metals Ind., Ltd.
-
SUKAWA Tomoyuki
Graduate student, Graduate School of Engineering, Hokkaido University
-
ARAHATA Daisuke
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
BJURSTROM Martin
Division of Applied Process Metallurgy, KTH
-
JONSSON Par
Department of Materials Science and Engineering, Royal Institute of Technology
-
Ishii Kuniyoshi
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
ISHII Toshio
JFE Steel Corporation
-
Sasaki Yasushi
Graduate Institute Of Ferrous Technology Pohang University Of Science And Technology
-
Sakamoto Mitsuru
Graduate Student Osaka University
-
ZEZE Masafumi
Yawata R&D Laboratory, Nippon Steel Corporation
-
Uemura Tomomasa
Department Of Systems Management Engineering Faculty Of Engineering Kansai University
-
Joensson Paer
Royal Inst. Of Technol. (kth) Stockholm Swe
-
Jonsson Par
Division Of Applied Process Metallurgy Kth
-
Matsuura Kiyotaka
Division Of Materials Science And Engineering Hokkaido University
-
Jonsson Lage
Div. Of Applied Process Metallurgy Royal Inst. Of Technol.
-
Tsujino Ryoji
Department Of Mechanical Engineering Faculty Of Engineering Setsunan University
-
Iguchi M
Hokkaido Univ. Sappporo Jpn
-
SATO Takeshi
Department of Clinical Oncology, The Institute of Medical Science, The University of Tokyo
-
Terauchi Yukio
Faculty of Enginnering, Hokkaido University, ,,,
-
NAKAJIMA Keiji
Sumitomo Metal Industries Ltd.
-
ILEGBUSI Olusegun
Department of Mechanical, Industrial and Manufacturing Engineering, Northeastern University
-
SANO Mitsuhiro
Graduate School of Engineering, Osaka University
-
YASUGAIRA Waichi
Department of Mechanical Engineering, Utunomiya University
-
WESTOFF R.
Department of Materials Science and Engineering, Massachusetts Institute of Technology
-
Sasaki Yasushi
1) Graduate Institute of Ferrous Technology (GIFT), Pohang University of Science and Technology (POS
-
ISHII Toshio
JFE R&D Corporation
-
OHKAWARA Kenyu
Graduate School of Engineering, Hokkaido University
-
HIJINO Satoru
Graduate School of Engineering, Hokkaido University
-
Kim Hyun-Soo
Graduate Institute of Ferrous Technology (GIFT), Pohang University of Science and Technology (POSTEC
-
Kim Hyun-soo
Graduate Inst. Of Ferrous Technol. (gift) Pohang Univ. Of Sci. And Technol. (postech)
-
Hijino Satoru
Graduate School Of Engineering Hokkaido University
-
Westoff R.
Department Of Materials Science And Engineering Massachusetts Institute Of Technology
-
Terauchi Y
Technical And Quality Control Department Heraeus Electronite Japan
-
Terauchi Yukio
Heraeus Electro-nite Japan
-
Terauchi Yukio
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
YAMAMOTO Fujio
Department of Mechanical Engineering, Fukui University
-
Iguchi Manabu
Division Of Materials Sicence And Engineering Hokkaido University
-
TERUCHI Yukio
Faculty of Engineering, Hokkaido University
-
Kim Hyun-Soo
Technical Research Laboratories, POSCO
-
Nogi Kiyoshi
Jwri Osaka University
-
Yoshida Jin
Graduate Student Graduate School Of Engineering Hokkaido University
-
Ishikawa Masa-aki
Nuclear Eng. Res. Labo. The University Of Tokyo
-
Inoue Tsutomu
Graduate Student Hokkaido University
-
SONG Xiangqun
Department of Mechanical Engineering, Fukui University
-
ERSSON Mikael
Division of Applied Process Metallurgy, Royal Institute of Technology
-
JONSSON Lage
Division of Applied Process Metallurgy, Royal Institute of Technology
-
WATANABE Tsuyoshi
Graduate School of Environmental Studies, Nagoya University
-
TAKANO Keiji
Huens Co., Ltd.
-
SHITARA Hidehiro
Huens Co., Ltd.
-
MARUYAMA Toshihiko
Science and Technology Coordinator, Northern Advancement Center for Science and Technology, Japan Sc
-
IGUCHI Daisuke
Division of Materials Science and Engineering, Hokkaido University
-
KANEKO Motoki
Department of Mechanical Engineering, Nippon Institute of Technology
-
OOTANI Shingo
Department of Mechanical Engineering, Nippon Institute of Technology
-
MIZUNO Yoshiteru
SYSMEX CORP.
-
TAKATOO Masashi
Hokkaido University
-
TAKATOO Masashi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
KUDOH Masayuki
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Tada Kenji
Department Of Developmental Genetics Kumamoto University
-
SONOYAMA Nozomu
Graduate Student, Division of Materials Science and Engineering, Graduate School of Engineering, Hok
-
Jonsson Lage
Division Of Applied Process Metallurgy Kth
-
TAKAHASHI Yusuke
Departments of Materials Science and Engineering, Nagoya Institute of Technology
-
Kudoh M
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Kudoh Masayuki
Division Of Materials Science And Engineering Faculty Of Engineering Hokkaido University
-
KUMAGAI Takehiko
Graduate School of Engineering, Hokkaido University
-
Zhu M‐y
Northeastern Univ. Chn
-
ZHU Miao-yong
Ferrous Metallurgy Department, Northeastern University
-
SAWADA Ikuo
Advanced Technology Research Laboratories, Nippon Steel Corporation
-
Song X
Department Of Mechanical Engineering Fukui University
-
松浦 清隆
北海道大学大学院工学研究科
-
Yoshida J
Japan Sci. And Technol. Agency Sapporo Jpn
-
SHIMIZU Tomoyuki
Graduate Student, Graduate School of Engineering, Hokkaido University
-
MIZUNO Yoshiteru
Graduate Student, Graduate School of Engineering, Hokkaido University
-
SAKAI Yusuke
Graduate School of Engineering, Hokkaido University
-
OMURA Masutaka
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
ISHIDA Masashi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
SAKAIRI Masatoshi
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Tada Kenji
Department Of Mechanical Engineering Nippon Institute Of Technology
-
KODAMA Takuhiro
Graduate School of Engineering, Hokkaido University
-
KODAMA Takuhiro
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
GODA Tomoya
Graduate Student, Graduate School of Engineering, Hokkaido University
-
Nasukawa Youhei
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Sakai Yusuke
Graduate School Of Engineering Hokkaido University
-
Omura Masutaka
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
ISHIGURO Keisuke
Graduate Student, Graduate School of Engineering, Hokkaido University
-
MIZUNO Yoshiteru
Senior Researcher, SYSMEX CORP.
-
Nakajima Katsumi
Materials & Processing Reserach Center Nkk Corp.
-
Yasugaira Waichi
Department Of Mechanical Engineering Utunomiya University
-
Kumagai Takehiko
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Kumagai Takehiko
Graduate School Of Engineering Hokkaido University
-
Ishiguro Keisuke
Graduate Student Graduate School Of Engineering Hokkaido University
-
Ishiguro Keisuke
Graduate School Of Engineering Hokkaido University
-
Kitamura Shin-ya
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Matsuura Kiyotaka
Division Of Material Science And Engineering Hokkaido University
-
Sakairi Masatoshi
Graduate School Of Engineering Hokkaido University
-
Sakairi Masatoshi
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Iguchi Manabu
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido Univesity
-
Sonoyama N
Hokkaido Univ. Sapporo Jpn
-
Sonoyama Nozomu
Graduate Student Division Of Materials Science And Engineering Graduate School Of Engineering Hokkai
-
SONOYAMA Nozomu
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Sato Takeshi
Department Of Bioresource Science Faculty Of Agriculture Kagawa University
-
山本 富士夫
福井大学大学院工学研究科ファイバーアメニティ工学専攻
-
Goda Tomoya
Graduate Student Graduate School Of Engineering Hokkaido University
-
Uemura Tomomasa
Department Of Mechanical Engineering Kansai University
-
Terauchi Y
Heraeus Electronite Japan Osaka Jpn
-
TERAUCHI Yukio
Technical and Quality Control Department, Heraeus Electronite Japan
-
KOSAKA Hiroaki
Technical and Quality Control Department, Heraeus Electronite Japan
著作論文
- Physical-modeling Study of Fluid Flow and Gas Penetration in a Side-blown AOD Converter
- Swirl Motions Caused by Horizontal Gas Injection with an L-Shaped Lance
- Swirl motions caused by horizontal gas injection with an L-shaped lance
- Rising behavior of air-water two-phase flows in vertical pipe ofpoor wettability
- Merging Distance of Two Air-Water Vertical Bubbling Jets Subjected to coanda Effect
- Coanda Effect on Bubble Characteristics in a Bubbling Jet Rising Near the Side Wall of a Cylindrical Vessel
- Flow Establishment Time of a Water Bath Contained in a Cylindrical Vessel Set in Sudden Rotation
- Model Study of Fluid Flow Phenomena in a Bottom Blown Bath in the Presence of Reverse Emulsification
- Effects of the Physical Properties of Top Oil Layer on Bubble and Liquid Flow Characteristics in a Bottom Blown Water Bath
- Numerical Analysis of Transient Flow in a Water Bath Contained in a Cylindrical Vessel Suddenly Set in Rotation
- Prediction of the Occurrence of Swirling Liquid Jet Generated by Off-centered Nozzle
- Development of Swirling Flow Generator in Immersion Nozzle
- Swirling Flow Effect in Immersion Nozzle on Flow in Slab Continuous Casting Mold
- Formation of Fine Bubble through Swirling Motion of Liquid Metal in the Metallurgical Container
- Prevention of Air Suction from the Contact-part between Sliding Gate and Immersion Nozzle
- Removal of Inclusion through Bubble Curtain Created by Swirl Motion in Submerged Entry Nozzle
- Swirling Effect in Immersion Nozzle on Flow and Heat Transport in Billet Continuous Casting Mold
- Mixing Time in a Side-Blown Converter
- Physical Modeling of a Sampler Filling for Molten Steel
- The Coordination of F Ions around Mg and Ca Ions in Molten CaO–CaF2–MgO–SiO2 System at 1873K
- Self-Induced Rotary Sloshing Caused by an Upward Off-Centered Jet in a Cylindrical Container
- Particle Layer Thickness Effect on Particle Entrainment in a Mechanically Agitated Bath
- EFFECT OF LOW-DENSITY PARTICLES ON SWIRLING LIQUID JET IN TRANSIENT PERIOD
- Water-model Experiment on Melting Powder Trapping by Vortex in the Continuous Casting Mold
- The Coordination of F Ions around Al and Ca Ions in Molten Aluminosilicate Systems
- The Role of Ca and Na Ions in the Effect of F Ion on Silicate Polymerization in Molten Silicate System
- The Estimation of the Iso-viscosity Lines in Molten CaF2–CaO–SiO2 System
- Occurrence Condition of a Swirling Bubbling Jet in a Water Bath Covered with an Oil Layer
- PRACTICAL APPLICATIONS OF SWIRLING JETS TO MIXING PROCESSES(Swirling Flow and Separation)
- FUNDAMENTAL CHARACTERISTICS OF SWIRLING JETS IN CYLINDRICAL VESSEL(Swirling Flow and Separation)
- Prediction of the Occurrence of Swirl Motion at Interface between Stratified Two Liquids
- Model Study on a Swirl Motion of a Bubbling Jet Generated in a Wastewater Bath Covered with Top Oil Layer
- Cold Model Study of the Effects of Density Difference and Blockage Factor on Mold Powder Entrainment
- Promotion of Uniform Dispersion of Fine Particles into a Mechanically Agitated Steel Bath
- The Effect of Grain Boundaries on the Surface Rearrangement during Wustite Reduction within its Range of Existence
- Measuring Strains for Hematite Phase in Sinter by Electron Backscattering Diffraction Method
- The Effect of Grain Boundaries on Iron Nucleation during Wustite Reduction Process
- Rupture Phenomena of Molten Alkali Silicate Thin Films
- Rupture phenomena of molten alkali silicate thinfilms
- Occurrence Condition for a Swirl Motion of a Bath Agitated by Bottom Gas Injection
- Fluid Flow in a Combined Top and Bottom Blown Reactor
- Swinging Motion of Bath Surface Induced by Side Gas Injection
- Model Study of the Rupture Phenomena of a Metal Droplet Growing on a Slag-Metal Interface
- Prediction of the Occurrence of Swirling Liquid Jet
- Proposal of a Novel Agitation Method using Swirl Motion of Molten Metal Jet
- Processing of Refractory Organic Waste Water Using Ozone and Novel Agitation Method
- Mixing time in a cylindrical bath agitated by swirl motion of water jet
- Swirling Flow Effect in Off-center Immersion Nozzle on Bulk Flow in Billet Continuous Casting Mold
- Swirling Flow Effect in Submerged Entry Nozzle on Bulk Flow in High Throughput Slab Continuous Casting Mold
- Bifurcation Angle Effect on the Separation of Gas and Liquid in Horizontal Y-junction of Different Wettability
- Powder-Metallurgical Process for Producing Metallic Microchannel Devices
- Wettability Effects on Liquid Flow Characteristics in a Bubbling Wall Jet along a Vertical Flat Plate
- Swirling Flow Effect in Bottomless Immersion Nozzle on Bulk Flow in High Throghput Slab Continuous Casting Mold
- Swirling flow control in immersion nozzle for CC process
- Model Experiment on the Production of Silicon Droplet
- Physical characteristics of a Horizontally Injected Gas Jet and Turbulent Flow in Metallurgical Vessels
- Model Study on the Entrapment of Mold Powder into Molten Steel
- Fabrication of Porous Transpiration-Cooling Device by Powder-Metallurgical Microchanneling Process
- Effect of Parallel Flow on Frequency of Bubble Formation from Single-Hole Nozzle under Micro-Gravity Conditions
- Formation of Nanoporous Anodic Oxide Films on Ti-Al Microchannel Walls
- Formation Mechanism of Microchannels and Lining Layers in Sintered Iron Powder Compacts with Copper Sacrificial Cores
- Empirical Equations for Bubble Formation Frequency from Downward-Facing Nozzle with and without Rotating Flow Effects
- Separation of Gas from Downward Gas-Liquid Two-Phase Flow Using a Y-Junction of Poor Wettability
- Physical Modeling of a Sampler Filling for Molten Steel
- Wettability Effects on Bubble Characteristics in a Bubbling Wall Jet along a Vertical Flat Plate
- Molten Metal Flow Measurement Using Cylinder and Hall Element
- An Air Cavity Formed Behind a Poorly Wetted Sphere Penetrating into a Water Bath
- Spout Eye Area in Ladle Refining Process
- Model Experiments on the Mixing Time in a Bottom Blown Bath Covered with Top Slag
- Swirl Motions of Two Bubbling Jets Induced by Bottom Gas Injection
- Unsteady Motions of Cylindrical Bath Caused by Offset Bottom Gas Injection
- Gas-Liquid Mass Transfer in Simulated Turbulent Wake Flow
- Cold Model Study of the Effects of Density Difference and Blockage Factor on Mold Powder Entrainment
- Numerical Simulation on a Horizontal Flow Pattern of Jet-induced Rotary Sloshing in a Cylindrical Container
- The Coordination of F Ions around Al and Ca Ions in Molten Aluminosilicate Systems
- The Role of Ca and Na Ions in the Effect of F Ion on Silicate Polymerization in Molten Silicate System
- The Estimation of the Iso-viscosity Lines in Molten CaF_2-CaO-SiO_2 System
- Swirl Motions in a Cylindrical Bath Induced by Gas Injection under Reduced Pressure on Surface
- Formation of Porous Intermetallic Thick Film by Ni-Al Microscopic Reactive Infiltration
- Effect of Swirl Motion on Mixing Time in Water Bath Agitated by Upward Gas Injection
- H202 INTERACTION BETWEEN TWO BUBBLING JETS DUE TO COANDA EFFECT(Bubble behavior)
- Karman Vortex Probe for the Detection of Molten Metal Surface Flow in Low Velocity Range
- The Preferable Growth Direction of Iron Nuclei on Wustite Surface during Reduction
- Swirl Motion of a Mercury Jet Appearing in a Cylindrical Vessel in Transient Period
- Model Study on a Swirl Motion of a Bubbling Jet Generated in a Wastewater Bath Covered with Top Oil Layer
- A bouncing droplet on an inclined hydrophobic surface
- A Method for Measuring Particle Size in Overlapped Particle Images
- Water Model Experiments on the Effect of an Argon Bubble on the Meniscus Near the Immersion Nozzle
- Model Study of the Rupture Phenomena of a Metal Droplet Growing on a Slag-Metal Interface
- Particle Layer Thickness Effect on Particle Entrainment in a Mechanically Agitated Bath
- Promotion of Uniform Dispersion of Fine Particles into a Mechanically Agitated Steel Bath
- Water-model Experiment on Melting Powder Trapping by Vortex in the Continuous Casting Mold
- Repulsive Capillary Force between two Plates Linked by a Concave Molten Slag Bridge
- Instability Phenomena at Bath Surface Induced by Top Lance Gas Injection
- Wettability Effect on a Single Bubble Rising in Stagnant Water Contained in a Vertical Circular Pipe
- Correlation of Flow Establishment Time for Uniform Dispersion of Fine Particles in a Bath with an Immersion Cylinder
- Mixing Time in a Side-Blown Converter
- Downward Air-water Two-phase Flow Near the Outlet of a Model Immersion Nozzle
- Prediction of Argon Gas Attachment to Sliding Gate in Immersion Nozzle
- Model Experiments on Transient Swirl Motion of a Wastewater Jet Generated by J-Shaped Lance
- Mathematical Modeling of Flow and Inclusion Motion in Vessel with Natural Convection
- Mechanism of Mold Powder Entrapment Caused by Large Argon Bubble in Continuous Casting Mold
- Preface to the Special Issue on "Mathematical Modeling of Iron and Steel Making Processes"
- Mixing Time in a Bath in the Presence of Swirl Motion Induced by Horizontal Gas Injection with an L-Shaped Lance
- Mixing Time in a Cylindrical Bath Agitated by Gas Injection through an L-shaped Top Lance in the Absence of Swirl Motion