Electrodeposition of Zn–V Oxide Composites from a Strongly Agitated Solution without Dispersed Particles
スポンサーリンク
概要
- 論文の詳細を見る
The electrodeposition of a Zn–V oxide composite under galvanostatic conditions from an agitated sulfate solution without dispersed particles and containing Zn2+ and VO2+ at pH 2 and 313 K was investigated. Although the V content in the deposits initially decreased with increasing current density, irrespective of the flow rate of electrolyte, a further increase in the current density resulted in an increase in the V content of the deposits. The curves, which show the relationship between the V content in the deposits and the current density, shifted to the higher-current-density region with increasing flow rate of the electrolyte. Agitation of the electrolyte decreased the V content of the deposits but reduced the segregation of V oxide. EDX point analysis of the cross-section of the deposits revealed that the V oxide concentrated at the surface of the deposits. The polarization curves in 3% NaCl solution revealed that the corrosion potential of the deposited Zn–V oxide films depended on the V content in the deposits, irrespective of the flow rate of electrolyte, and that the corrosion potential shifted toward the more noble direction with the codeposition of V oxide when the V content in the deposits was less than 2 mass%. At V contents of <4 mass%, the corrosion current density of the deposits decreased with increasing V content. The corrosion current densities of the deposits obtained from agitated solutions were smaller than those of the deposits obtained from unagitated solutions.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels