金属箔ベルトを用いた板状氷連続製造装置
スポンサーリンク
概要
- 論文の詳細を見る
We invented and studied a new ice making system, in which a cooling plate freezes water through a thin metallic belt and protected ice is removed from on the plate by moving the belt. It is shown that the system is able to make long and plate-like ice continuously for more than four hours. The thickness of the ice can range from 1 to 8 mm depending on belt feed speed and temperature of the cooling plate. Then, from a measured mass rate of ice production, we calculated thermal contact resistance between the cooling plate and the belt, which is an important parameter for evaluating ice-making performance of the system. In the results, it is found that the resistance, which is significantly decreased by increase of the belt feed speed, can be low enough not to hinder the ice-making performance. Additionally, feeding the belt back and forth with short strokes is to be effective in reducing the resistance while maintaining the thickness of the plate-like ice.
- 公益社団法人 日本冷凍空調学会の論文
公益社団法人 日本冷凍空調学会 | 論文
- 液滴の過冷却凝固について:-食塩水溶液-
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について:臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 エマルションの組成が製氷過程に与える影響について:(エマルションの組成が製氷過程に与える影響について)
- クロスフィンチューブ熱交換器におけるフィンカラー形状が伝熱性能に及ぼす影響
- マイクロガスタービン・固体酸化物形燃料電池複合発電による分散エネルギーシステムの性能解析と最適運用計画