着霜を伴う水平円柱周りの過渡熱伝達
スポンサーリンク
概要
- 論文の詳細を見る
This study examined transient heat transfer characteristics while frosting in order to clarify heat transfer mechanism by which a high heat flux is obtained at the frosting initial stage. For the purpose, a high-precise temperature measurement was carried out in the frost layer and outside of a horizontal cylinder. The thermocouples for the temperature measurement were composed of a chromel wire of 0.1 diameter and several constantan wires of 0.05mm diameter. The chromel wire was welded on the surface of the horizontal cylinder, and several constantan wires were welded in about a 1mm interval on the surface of the chromel wire. As a result, the surface temperature of the frost layer proportionally increased with the increase in the thickness of the frost layer. The time mean value of the measured local Nusselt number decreased in order of the value in the upper part of the cylinder, intermediate and lower parts, were respectively 11.5, 7.5 and 6.0. The measured thermal conductivity of the frost layer rose with the increase in the thickness of the frost layer, and the value was within 0.04-0.12 W/mK.
- 公益社団法人 日本冷凍空調学会の論文
公益社団法人 日本冷凍空調学会 | 論文
- 液滴の過冷却凝固について:-食塩水溶液-
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について:臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 エマルションの組成が製氷過程に与える影響について:(エマルションの組成が製氷過程に与える影響について)
- クロスフィンチューブ熱交換器におけるフィンカラー形状が伝熱性能に及ぼす影響
- マイクロガスタービン・固体酸化物形燃料電池複合発電による分散エネルギーシステムの性能解析と最適運用計画