ハーベスト式ダイナミック氷蓄熱用製氷板の熱特性
スポンサーリンク
概要
- 論文の詳細を見る
We experimentally examined the characteristics of a heat transfer plate during ice and chilled water making. The stainless steal heat transfer plate was developed for dynamic ice harvesting thermal storage systems. We obtained the following results:(1) The range 1.2×10-4 to 1.7×10-4m3<3/sup>/(s⋅m) volume flow rate is the optimum value to obtain the maximum amount of ice during ice making. (2) The estimated history of the ice thickness, which is obtained from the accumulated latent heat, is 0.8 to 0.85 times that of the semi-theoretical value. This is because the weld lines on the heat transfer plate don't contribute ice making plate. (3) The measured surface heat transfer coefficient during chilled water making is about 1.2 times of the calculated value when the volume flow rate is up to 1.6×10-4m3/(s⋅m). This is because the falling film on the heat transfer plate is uniform and the heat transfer plate surface with wave contributes to increasing the heat transfer coefficient.
- 公益社団法人 日本冷凍空調学会の論文
公益社団法人 日本冷凍空調学会 | 論文
- 液滴の過冷却凝固について:-食塩水溶液-
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について:臨界表面張力の小さな壁面材質の熱抵抗が製氷過程に与える影響について
- 水‐油エマルションを用いた氷蓄熱のための容器内撹はん製氷 エマルションの組成が製氷過程に与える影響について:(エマルションの組成が製氷過程に与える影響について)
- クロスフィンチューブ熱交換器におけるフィンカラー形状が伝熱性能に及ぼす影響
- マイクロガスタービン・固体酸化物形燃料電池複合発電による分散エネルギーシステムの性能解析と最適運用計画