Fluid-Structure Interaction Study on Diffuser Pump With a Two-Way Coupling Method
スポンサーリンク
概要
- 論文の詳細を見る
In order to study the effect of the fluid-structure interaction (FSI) on the simulation results, the external characteristics and internal flow features of a diffuser pump were analyzed with a two-way flow solid coupling method. And the static and dynamic structure analysis of the blade was also caculated with the FEA method. The steady flow field is based on Reynolds Averaged N-S equations with standard k-ε turbulent model, the unsteady flow field is based on the large eddy simulation, and the structure response is based on elastic transient structural dynamic equation. The results showed that the effect of FSI on the head prediction based on CFD really exists. At the same radius, the van mises stress on the nodes closed shroud and hub was larger than other nodes. A large deformation region existed near inlet side at the middle of blades. The strength of impeller satisfied the strength requirement with static stress analysis based on the fourth strength theory. The dynamic stress varied periodically with the impeller rotating. It was also found that the fundamental frequency of the dynamic stress is the rotating frequency and its harmonic frequency. The frequency of maximum stress amplitude at node 1626 was 7 times of the rotating frequency. The frequency of maximum stress amplitude at node 2328 was 14 times of the rotating frequency. No matter strength failure or fatigue failure, the root of blades near shroud is the key region to analyse.
- ターボ機械協会、韓国流体機械学会、中国工程熱物理学会、国際水理学会の論文
ターボ機械協会、韓国流体機械学会、中国工程熱物理学会、国際水理学会 | 論文
- Prediction of Wear Depth Distribution by Slurry on a Pump Impeller
- Computational Investigations of Impingement Heat Transfer on an Effused Concave Surface
- Influence of Blade Outlet Angle and Blade Thickness on Performance and Internal Flow Conditions of Mini Centrifugal Pump
- Experimental Study on Surge Inception in a Centrifugal Compressor
- Erratum:Dynamic Analysis of Francis Runners - Experiment and Numerical Simulation[International Journal of Fluid Machinery and Systems Vol. 2 (2009) , No. 4 (October-December), pp.303-314]