流動化操作を用いた粉体の高濃度輸送
スポンサーリンク
概要
- 論文の詳細を見る
Dense phase pneumatic conveying in a pipeline is often applied to avoid disadvantage such as high power consumption, particle breakage and pipeline abrasion. This article described mainly the dense phase pneumatic conveying in a horizontal rectangular channel using the fluidizing air. The fluidized powder conveying system consists of a powder supply vessel and a horizontal rectangular channel at the side of vessel. The powder was fluidized by air through the porous membrane at the bottom of a vessel and a horizontal channel. The powder used belongs to Geldart A particle, where the mean diameter is 53 μm, the particle density is 2523kg/m3 and the minimum fluidizing velocity is 4.329mm/s. The mass of transported powder, the bed height of powder in a vessel and the supply air pressure were measured when the fluidizing velocities at the bottom of vessel and horizontal channel were changed. The powder could be transported smoothly when the air was supplied to the bottom of vessel and the velocity of the bottom of horizontal channel exceeded the minimum fluidizing velocity. In this case, the powder was discharged smoothly from vessel to horizontal channel, and then the powder flowed easily toward the exit of horizontal channel. Therefore, the fluidizing air at the bottom of vessel and horizontal channel was important to obtain smooth powder conveying on this system. Also, the mass flow rate of powder and the solid loading ratio were estimated from the mass of transported powder against the elapsed time. As the result, the solid loading ratio had taken a one peak when the fluidizing velocity at the bottom of horizontal channel was larger than the minimum fluidizing velocity. In addition, it is found from the analyzed solid loading ratio that the high dense powder conveying was possible in this system.
- 日本混相流学会の論文
日本混相流学会 | 論文
- 不凝縮性ガス存在下における滴状凝縮熱伝達に関する研究
- ドラッグデリバリーシステム
- (株)荏原総合研究所
- 浮遊液滴の回転変形挙動に及ぼす粘性の影響に関する研究
- 浮遊液滴の非線形挙動に関する研究 : 静電浮遊液滴の振動・回転に対する変形挙動