Simple Compression Processing for Improvement of the Surface Hardness of Sugi
スポンサーリンク
概要
- 論文の詳細を見る
The optimal conditions of compression processing in a short time and with low energy using hot-pressing to improve surface hardness of Sugi (Cryptomeria japonica) was investigated. In this study, after boards of Sugi of sapwood and heartwood were conditioned to approximately 10 and 25% of moisture content (MC) and compressed at temperatures of 20 to 140°C with 6 cycles of compression processing including 5 minutes pressing and 1 minute unloading, they were evaluated by recovery of compressive deformation by springback, density profile in the radial direction, observation by Scanning Electron Microscope (SEM) and Brinell hardness. From these results, the optimal condition of compression processing in this study was approximately 10% of MC, and pressing temperatures above 100°C for sapwood and at 100°C for heartwood. Density and hardness of the surface on compressed woods were kept at a high level after planer treatment. Since boards generally contain both sapwood and heartwood, the optimal condition of compression processing is considered approximately 10% of MC and at 100°C of pressing temperature. Long-term dimensional stability was not considered because compressed board is assumed to be painted right after compression processing.
- The Japan Wood Research Societyの論文
The Japan Wood Research Society | 論文
- 静的曲げモーメントを受けるタケ・ヒノキ接着板の応力と強度
- アラゲキクラゲ(Auricularia polytricha)培地の炭水化物含有量と子実体発生量の相関
- 樹皮タンニンの化学特性と化学・酵素変換
- ヤシ殻チャーからのKOH-水蒸気二段階賦活炭の製造とその吸着特性
- 木造住宅の構造部材に生じる各種応力の許容応力度に対する割合(第5報) 一般地域に建設された住宅の梁に強度等級E55-F200の構造用集成材を使用した場合:一般地域に建設された住宅の梁に強度等級E55-F200の構造用集成材を使用した場合