ナノ組織を有するＮｉＡｌ溶射皮膜の作製とその特性評価
スポンサーリンク
概要
- 論文の詳細を見る
The stoichiometric NiAl exhibits attractive properties in terms of high melting point (1911K), high thermal conductivity, oxidation resistance and low density (5.9kg/m3). However, it has been limited to apply the material for industrial fields because of its extreme brittleness at ambient temperature range. It is considered that the refinement of grain size to nano meter level seems to be a promising way to overcome the above mentioned problem because the enhancement of hardness and strength can be expected by nano-structure, according to Hall-Petch law. In the present study, synthesis of nano-structured NiAl coating was carried out by using MA (mechanical alloying) process and HVOF (high velocity Oxy-fuel) spraying. In addition, effect of nano-structure to the mechanical properties of NiAl coating was also investigated. It was observed that the coating obtained by the process used was composed of both nano-structuered NiAl and Ni phase. However, mechanical properties of the coating were not affected so severely by the grain size of sprayed powders prepared, with the difference between approximately 20nm and 200nm.
- 一般社団法人 溶接学会の論文
一般社団法人 溶接学会 | 論文
- Special issue. New frontiers of welding technology. Design of super sky scyaper and its conection and welding.
- The Microstructure of Iron Base Binary Weld Metals (Report 2):Effect of ferrite formers
- The Microstructure of Iron Base Binary Weld Metals (Report 1):Effect of austenite forming type alloying elements
- The Behavior of Hydrogen in Arc Welding (Report 4):Hydrogen dissolution into submerged arc weld metal
- A Study on Submerged Arc Welding of HT-80 Steel (Report 1):Cracking and Hydrogen in submerged arc weld metal