Development of an Ion Removal Technique Based on Capacitive Deionization for Treatment of Rinse Water from Incineration Ash
スポンサーリンク
概要
- 論文の詳細を見る
Capacitive deionization technique having higher efficiency and lower operation cost in comparison with the reverse osmosis technique for regeneration of rinse water used for dechlorination of incineration ashes is investigated. Activated charcoal-based electrodes were developed and characterized for their capacity to remove the chlorine ions dissolved in rinse water for incineration ashes. The mass ratio of rinse water to incineration ashes was also investigated to realize the most efficient removal of chloride from rinse water and minimize the regeneration load of the rinse water. The electrochemical properties of the developed electrode were characterized using a three-electrode cyclic voltammetry system, which showed that chemically modified carbon electrodes demonstrated an increase in capacitance. An asymmetrical distribution of capacities of both electrodes was found to be ideal wherein no electrochemical reactions took place at the electrode surface. The electrode capacities were defined based on the difference between the rest potential of the electrodes and the oxidation-reduction potential of the solution. Furthermore, the ion removal capacity of the electrode was evaluated using NaCl solution with a conductivity of 11 mS/cm. The electrode with a thickness ratio of 2.5:1 (anode:cathode) exhibited high ion removal capacity up to 0.034 mol/m<SUP>2</SUP>.
- Japan Society on Water Environmentの論文
Japan Society on Water Environment | 論文
- Long-term Performance and Community Analysis of Spirodela Polyrrhiza-bacteria Association Treating Phenol-contaminated Water
- Long-term Performance and Community Analysis of Spirodela Polyrrhiza-bacteria Association Treating Phenol-contaminated Water
- Surface characteristics of acidogenic sludge in H2-producing process
- Contact-Adsorption-Regeneration-Stabilization Process for the Treatment of Municipal Wastewater
- Removal of arsenic from synthetic groundwater by adsorption using the combination of laterite and iron-modified activated carbon