Studies on the Seedbed Making Tillage by Rotary Tiller (III):On the Shield Performance for the Various Sorts of Tillage Tine
スポンサーリンク
概要
- 論文の詳細を見る
This report examines seedbed making performances of various tilling tines (pick tine, knife tine, L-tine) when the tines are used in combination with the shield.1) Although the tilling power increased when the shield was used, the seedbed making parformances (soil pulverizing, cutting and covering of rice stubble, soil leveling) were improved, and showed an exponential variation with an increase in shield controlling rate CT.2) Differences in the seedbed making performances among various tilling tines became small when using the shield, and breaking ratio Rf was in a range from 0.75 to 0.79 when the testing condition was restricted to 40%<CT<50%, T0=90mm, and Pi=120mm.3) Quartile skewness Sq found from a distribution of the pulverized soil diameter became small when the shield was used and difference between various tilling tines also became small when the shieid was used.4) Weight mean diameter DW2 of tilled clod was expressed in terms of tilling pitch Pi and shield controlling rate CT asDW2=(A0⋅Pin1) CT-n2, mmwhere A0, n1, and, n2 were constants.5) Soil leveling was controlled largely by CT, and its relationship with DW2 was also high showing a high significance.6) The pick tine had a high pulverizing performance and rice stubble disposing performance was also improved by controlling the shield, but entangling of rice stubbles to the tilling rotor and tines became also accelerated at the same time, and pursuance of the normal tilling operation became hard.7) The L-tine had, in general, a high pulverizing performance, and showed uniform and improved cutting of rice stubbles especially when N8-N28.8) Performance of the knife tine approached that of the L-tine with N45-N85, but consumed rather high tilling power.9) Both the rotor and axle torques increased with an increase in the shield controlling rate. However, the axle torque decresed when tines used consumed a large rotor torque.10) Fluctuation ratio of the rotor torque was smaller than that with out the shield, but the specific torque for tilling became higher and showed a broader torque distribution.
- 農業機械学会の論文
農業機械学会 | 論文
- 千切大根の乾燥特性 ―収縮を伴うみかけの減率乾燥―
- 水浸時の精白米の裂傷に関する研究
- 赤外線ガス分析計による籾・小麦の呼吸特性の測定
- 籾のマイクロ波乾燥に関する基礎的研究
- 氷蓄熱冷却式貯蔵庫による伊予柑の貯蔵とシステムの熱負荷特性の解析