Studies on Test for Plastic Properties of Coal by the Gieseler Plastomer
スポンサーリンク
概要
- 論文の詳細を見る
Testing method for plastic properties of coal by the Gieseler Plastometer has beeng employed in the revised JIS M 8801-1972 (Testing methods for coal).<BR>Therefore, we studied on the instrumental factors which would affect the data of the Gieseler Plastometer, one of the quite useful informations to Japanese coke industries in evaluating the quality of metallurgical coals.<BR>Informations obtained are as follows:<BR>1) The physical condition of a joining part between crucible and stirrer play very important role on plastic properties. Although their qualities do affect plasticities slightly.<BR>2) The stirrer shall be replaced after wear to the extent that the diameter of rabble arms are reduced to 1.5 mm, because a maximum fluidity increases rapidly as soon as they are worn to less than 1.4 mm in their diameters.<BR>3) With regard to the sample size, the significant difference of the maximum fluidity is observed between two samples of-35 mesh and-60 mesh. Overcrushing, therefore, must be avoided carefully in sample preparation.<BR>4) As the decrease of the maximum fluidity can be recognized after about one month from sample preparation, the measurement should be done as soon as possible when a sample is prepared.<BR>5) The repeatability in same laboratory obtained by the interlaboratory experiment was superior to the tolerance specified in ASTM D 1812-69, however, the reproducibility between different laboratories was an unsatisfactory result, probably due to the differences in the apparatus of each laboratory.
- 一般社団法人 日本エネルギー学会の論文
一般社団法人 日本エネルギー学会 | 論文
- Modifying Optical Texture of the Coke from Miike Coal
- Development of Petrochemical Industry with the Background of Iron Manufacturing Industry
- タイトル無し
- Study on Development of Waste Oil Combustion Burner for Energy Saving and Low-Pollution (II): Combustion of Waste Oil and Exhaust Emission Characteristics by Internal Mixing Twin-Fluid Atomizer:Combustion of Waste Oil and Exhaust Emission Characteristics
- Study on Development of Waste Oil Combustion Burner for Energy Saving and Low-Pollution (I): Atomization of High-Viscous Liquid Jet by Internal Mixing Twin-Fluid Atomizer:Atomization of High-Viscous Liquid Jet by Internal Mixing Twin-Fluid Atomizer