Superconducting Generator
スポンサーリンク
概要
- 論文の詳細を見る
This paper describes the design and performance of a 10kW partially superconducting homopolar dc generator with an ambient temperature rotor on the Faraday disc principle and with the field supplied by a stationary superconducting coil. This configuration of machine could, in very large ratings, compete with conventional machines.A simple solenoid field coil is wound with a fully stabilized Nb-Ti composite wire and produces a central field of 40kG. The inner dia., outer dia., and length of the coil are 21.5, 34, and 25cm, respectively.The disc type rotor consists of 8 copper discs of 13cm diameter connected electrically in series by the inner and outer brushes and its overall length is 50cm.The maximum output power of the generator was obtained 10V-1, 000A-10kW and the current density of a brush was up to 100A/cm2, which was five times as high as that of conventional machines.
- 公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会)の論文
公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会) | 論文
- Test Results of the SMES Model Coil. Cool-down and Thermal Characteristics.:Cool-down and Thermal Characteristics
- Crystal Growth of Y Based Superconductors on Solidification Processing.
- Refrigeration of pressurized He II using a 3He circulation system. (II). Behavior of the system during the initial cooling and after a pulsed heat generation.:Behavior of the System during the Initial Cooling and after a Pulsed Heat Generation
- Quench simulation analysis of a superconducting coil. II. Simulation.:II. Simulation
- タイトル無し