Oxide Superconducting Current Lead. Bi-2212 Current Lead for a Cryocooler-Cooled Superconducting Magnet.
スポンサーリンク
概要
- 論文の詳細を見る
We have developed a Bi2Sr2CaCu2O8+x(Bi-2212) current lead for a 10T NbTi/Nb3Sn magnet cooled by a cryocooler. The Bi-2212 bulk used in the lead was fabricated by a floating zone melting method with a CO2 laser. The grain-aligned microstructure along the longitudinal direction of the bulk, exhibited better magnetic field dependence of the critical current density Jc below 50K. This implies that the Bi-2212 lead is useful even in a high leakage field, when the high temperature end is connected to the 50K stage of a cryocooler. Moreover, an inner flexible copper portion was designed to reduce the thermal contraction difference. In the 10T magnet, a pair of these leads successfully transported 130 Amp. at a leakage field of 0.35T, which corresponded to a 10T field. The heat load to the 4K stage was 45mW, which was 1/10 of conventional Cu leads and was enough small for a cryocooler.
- 公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会)の論文
公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会) | 論文
- Test Results of the SMES Model Coil. Cool-down and Thermal Characteristics.:Cool-down and Thermal Characteristics
- Crystal Growth of Y Based Superconductors on Solidification Processing.
- Refrigeration of pressurized He II using a 3He circulation system. (II). Behavior of the system during the initial cooling and after a pulsed heat generation.:Behavior of the System during the Initial Cooling and after a Pulsed Heat Generation
- Quench simulation analysis of a superconducting coil. II. Simulation.:II. Simulation
- タイトル無し