Microstructure and Mechanical Properties of Dual-phase Steel Produced by Intercritical Annealing of Lath Martensite
スポンサーリンク
概要
- 論文の詳細を見る
Microstructure and tensile properties of a dual phase (martensite+ferrite) Fe-2.3%Mn-0.05%C-0.03%Nb steel produced by intercritical annealing of specimens with martensite structure have been studied. In order to assess the effects of prior austenite grain size on microstructure and tensile properties of the dual phase steel, the specimens in a martensitic state with widely different prior austenite grain size were prepared by thermal cycling and thermomechanical processing. Coarse dual phase structure consisting of fibrous martensite and ferrite was obtained by intercritical annealing of the specimens with coarse prior austenite grain size. A characteristic fine dual-phase structure consisting of homogeneously dispersed fine martensite particles and fine ferrite grains was obtained by the intercritical annealing of the specimens with ultra fine prior austenite grain size. The fine dual-phase structure was superior in both strength and ductility to the coarse dual phase structure over a wide range of martensite volume fractions examined. It is concluded that better combination of strength and ductility of the dual-phase steel is achieved by intercritical annealing of the martensitic specimens with ultra-fine prior austenite grain size which is obtained by the thermomechanical processing.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels