Dynamic Recrystallization of Austenite in 18-8 Stainless Steel and 18 Ni Maraging Steel
スポンサーリンク
概要
- 論文の詳細を見る
The dynamic recrystallization behavior of austenite in an 18-8 stainless steel and an 18 Ni maraging steel was studied mainly by microstructural observations of the specimens which were water-quenched immediately after the tensile deformation to various strains at temperatures ranging from 800 to 1200°C and at strain rates of 10-3-10-1 s-1, The changes in austenite grain size and hardness at room temperature due to the dynamic recrystallization were also studied.The deformation conditions for the occurrence of dynamic recrystallization in both steels were made clear as a function of deformation temperature (T), strain rate (ε) and strain (ε). Dynamic recrystallization takes place under the deformation conditions with Z (Zener-Hollomon parameter) less than the critical value of Zc. Zc increases as the amount of strain given by the hot deformation is increased or the initial austenite grain size is decreased. The addition o f Cr seems to have the retarding effect on the occurrence of dynamic recrystallization of austenite. The dynamically recrystallized grain size (D) is determined only by the deformation condition z, and does not depend on the strain and the initial grain size. D is decreased with increase in Z. The room temperature hardness of dynamically recrystallized austenite in 18-8 stainless steel and the martensite formed from the dynamically recrystallized austenite in 18 Ni maraging steel is higher than that of conventionally heat-treated specimens. However, such an increment of hardness due to dynamic recrystallization is not so large.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels