Testing Method of High-temperature Properties of Blast Furnace Burdens
スポンサーリンク
概要
- 論文の詳細を見る
Regarding the reduction under load test for measuring high temperature properties of blast furnace burdens, the test conditions, i.e. the load, gas flow rate, particle size and bed height were examined through tests and calculations based on a reduction model for fixed bed. Examinations covered also evaluation criteria of test results for high temperature properties.The results obtained are summarized as follows:(1)Test results are influenced by each of the load, gas flow rate, particle size and bed height conditions.(2) It is desirable to minimize the longitudinal difference of degree of reduction and the dependence on load of test results. The optimal test conditions (Fig. 2) were decided from such a point of view.(3) The following evaluation criteria of test results for high temperature properties were proposed: (i) the temperatures at the beginning of softening and melt-down are high, with a small temperature difference; (ii) the integral and average values of index of permeability resistance between softening and melt-down are small; and (iii) the degree of reduction achieved at 1000 to 1200°C is high.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels