Corrosion Protection Performance of Epoxy Coated High Tensile Strength Steel Measured by Scanning Electrochemical Microscope and Electrochemical Impedance Spectroscopy Techniques
スポンサーリンク
概要
- 論文の詳細を見る
The corrosion protection performance of epoxy coated High Tensile Strength (HT) steel was evaluated by using Electrochemical Impedance Spectroscopy (EIS) and Scanning Electrochemical Microscope (SECM) analysis. EIS was performed on coated HT steel with a scratch in a 0.1 M NaCl solution after a wet/dry cyclic corrosion test. The charge transfer resistance (Rct) and film resistance (Rf) of coated HT steel displayed a higher value than coated carbon steel. SECM was conducted to estimate the corrosion performance of the epoxy coated HT steel immersed in a 0.1 M NaCl solution. It was measured that dissolution of Fe2+ was suppressed at the scratch on the coated HT steel due to the higher resistance for anodic dissolution of the substrate. SEM/EDX analysis showed that Cr and Mo were enriched in corrosion products at a scratched area of the coated steel after corrosion testing. FIB-TEM analysis confirmed the presence of the nanoscale oxide layers containing Cr, Ni and Mo in the rust of the steel, which had a beneficial effect on the corrosion resistance of coated steel by forming protective corrosion products in the wet/dry cyclic test.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels