Improving the Engineering and Fluid Transport Properties of Ultra-High Strength Concrete Utilizing Ultrafine Palm Oil Fuel Ash

概要

論文の詳細を見る
Ground treated ultrafine-POFA obtained from palm oil industry was heat-treated to remove excess carbon. The varied proportion (17%, 30% and 40%) of UPOFA was incorporated into the ultra-high strength concrete (UHSC) to study its effects on the UPOFA-UHSC (Ux-UHSC) in comparison with OPC-UHSC (U0-UHSC) engineering and transport properties. The Ux-UHSC has an increasing workability tendency with a retarded setting times as compared to U0-UHSC. Besides, Ux-UHSC registered higher compressive strength than the U0-UHSC. The 90-d strength of 156 MPa was achieved in U17-UHSC which was 4.7%, 7.5% and 12.2% higher than the values obtained for U30-UHSC, U40-UHSC and U0-UHSC, respectively. The U40-UHSC exhibited the greatest improvement at 90 days in transport properties such as porosity, water absorption, initial surface absorption, rapid chloride permeability, gas permeability and water permeability while the highest strength was recorded with U17-UHSC. Thus, the pozzolanic UPOFA is capable of improving the engineering and transport properties of UHSC.
公益社団法人日本コンクリート工学会の論文