Repetition Frequency Dependence of Wave Drag Reduction Induced by Laser-Pulse-Energy Depositions
スポンサーリンク
概要
- 論文の詳細を見る
The mechanisms of drag reduction in a Mach 2 supersonic flow induced by repetitively deposited laser pulse energy are investigated through computational fluid dynamics based on Navier-Stokes equations for an axis-symmetric flow. The effectively deposited energy into the flow is determined by fitting a measured stagnation pressure history. With the repetition frequency lower than 20 kHz, the experimental flow-field, the residence time of baroclinically-generated vortex rings in the shock layer and drag reduction characteristics are well simulated by the axis-symmetric computation. At the lower frequency below 5 kHz, the low-density bubbles successively generated by energy depositions behave in an almost independent manner, so the drag reduction can be estimated by superimposing single pulses. At a middle frequency from 5 to 14 kHz, there is weak interaction among the successive vortex rings, but the behavior can be assumed to be almost independent. At even higher frequency, a quasi-stationary vortex ring is observed in the shock layer and grows according to frequency increases and the shape of the shock transit from the bow shock to the oblique one. The drag reduction is related to the number and the residence time of the vortex rings.
著者
-
Iwakawa Akira
Department of Aeronautics and Astronautics, Graduate School of Engineering, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501, Japan
-
SAKAI Takeharu
Department of Aerospace Engineering, Nagoya University
-
SASOH Akihiro
Department of Aerospace Engineering, Nagoya University
関連論文
- Numerical Investigation on Origin of Microscopic Surface Roughness during Si Etching by Chemically Reactive Plasmas
- Molecular Dynamics Simulation of Si Etching by Off-Normal Cl+ Bombardment at High Neutral-to-Ion Flux Ratios
- Repetition Frequency Dependence of Wave Drag Reduction Induced by Laser-Pulse-Energy Depositions
- CFD Simulation of Laser-Ablative Impulse Generation on Aluminum Target