Simple and Rapid Determination of Boron in the Wastewater with Azomethine H Using Accelerating Effect of Ammonium Ion
スポンサーリンク
概要
- 論文の詳細を見る
Boron is widely used in industry, and is regulated by the effluent standard (10 mg/L) in Japan. The standard azomethine H absorptiometric method for determining boron concentration requires long time; therefore, we have developed a simple, rapid azomethine H method for the management of the wastewater treatment equipment. The amount of boron was determined by measuring the absorbance of the boron-azomethine H complex after 5 min by using a simple spectrophotometer with a photodiode (370 - 600 nm) and a light-emitting diode (470 nm). Phosphate buffer with ammonium chloride was used, because the ammonium salt accelerated the formation of the boron complex. The effect of a large amount of calcium ions in the wastewater, which originated from calcium hydroxide, was eliminated by adding an excess of the buffer reagents. A combination of powdered azomethine H, L-ascorbic acid, EDTA, potassium dihydrogenphosphate, disodium hydrogenphosphate, and ammonium chloride was appropriate for the simple, rapid on-site determination of boron using a portable spectrophotometer.
著者
-
Endo Masatoshi
Graduate School Of Science And Engineering Yamagata University
-
Takahashi Yu
Graduate School Of Information Science Nara Institute Of Science And Technology
-
Sasaki Atsushi
Technical Division Of Instrumental Analysis Faculty Of Engineering Yamagata University
-
Mizuguchi Hitoshi
Graduate School Of Sci. And Engineering Yamagata Univ.
-
YOSHIKAWA Eishi
Graduate School of Science and Engineering, Yamagata University, Japan
-
SAKAI Kiyofumi
Graduate School of Science and Engineering, Yamagata University, Japan
-
SATO Koichi
Toho Technos Co., Ltd., Japan
-
SUGAWARA Kenichi
Toho Technos Co., Ltd., Japan
-
NEMOTO Satomi
Graduate School of Science and Engineering, Yamagata University, Japan
-
IHARA Tadao
Toho Technos Co., Ltd., Japan
関連論文
- Visual Colorimetry for Trace Antimony(V) by Ion-Pair Solid-Phase Extraction with Bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) on a PTFE Type Membrane Filter
- Objective sound quality evaluation for combination method of beamforming and spectral subtraction (応用音響)
- Fast Convergence Blind Source Separation Using Frequency Subband Interpolation by Null Beamforming
- On-site Determination of Trace Nickel in Liquid Samples for Semiconductor Manufacturing by Highly Sensitive Solid-phase Colorimetry with α-Furil Dioxime
- Ultra-Trace Determination of Lead(II) in Water Using Electrothermal Atomic Absorption Spectrometry after Preconcentration by Solid-Phase Extraction to a Small Piece of Cellulose Acetate Type Membrane Filter
- Rear Side Passivated Monocrystalline Silicon Thin Film Solar Cells with Laser Fired Contact Process
- Laser-Doping Technique Using Ultraviolet Laser for Shallow Doping in Crystalline Silicon Solar Cell Fabrication
- Precise Analysis of Surface Recombination Velocity in Crystalline Silicon Solar Cells Using Electroluminescence
- The Improvement of Water Quality in an Acidic River Environment Using Waste Concrete Aggregates
- Simple and Rapid Determination of Boron in the Wastewater with Azomethine H Using Accelerating Effect of Ammonium Ion
- Variations in the Concentration of Dissolved Metal Ions and their Buffering Effect in an Acidified River Environment