Study on High Speed Lithium Jet For Neutron Source of Boron Neutron Capture Therapy (BNCT)
スポンサーリンク
概要
- 論文の詳細を見る
The feasibility study of a liquid lithium type proton beam target was performed for the neutron source of the boron neutron capture therapy (BNCT). As the candidates of the liquid lithium target, a thin sheet jet and a thin film flow on a concave wall were chosen, and a lithium flow experiment was conducted to investigate the hydrodynamic stability of the targets. The surfaces of the jets and film flows with a thickness of 0.5 mm and a width of 50 mm were observed by means of photography. It has been found that a stable sheet jet and a stable film flow on a concave wall can be formed up to certain velocities by using a straight nozzle and a curved nozzle with the concave wall, respectively.
著者
-
Kobayashi Tooru
Research Reactor Inst. Kyoto Univ.
-
Takahashi Minoru
Research Laboratory For Nuclear Reactors Tokyo Institute Of Technology
-
KOBAYASHI Tooru
Research Reactor Institute, Kyoto University
-
ZHAO Wei
School of Energy and Power Engineering, University of Shanghai for Science and Technology
-
ZHANG Mingguang
Department of Nuclear Engineering, Tokyo Institute of Technology
-
MÁK Michael
Czech Technical University, CVUT - Fakulta strojní,, Ústav mechaniky tekutin a energetiky
-
ŠTEFANICA Jirí
Czech Technical University, CVUT - Fakulta strojní,, Ústav mechaniky tekutin a energetiky
-
DOSTÁL Václav
Czech Technical University, CVUT - Fakulta strojní,, Ústav mechaniky tekutin a energetiky
関連論文
- Effect of neutron irradiation on the structure of alpha-crystallin from bovine lens
- The Onset of Cavitation and the Acoustic Noise Characteristics of Sodium Flow in a Venturi
- Study on Corrosion Properties of Welded Ferritic-Martensitic Steels in Liquid Lead-Bismuth at 600°C
- In Vivo Evaluation of Carborane Gadolinium-DTPA Complex as an MR Imaging Boron Carrier
- Huma Melanoma Treated by Boron Neutron Capture Therapy: Comparison of the Clinical Response with the Predicted Response
- ICONE11-36375 STUDY ON CORROSION PHENOMENA OF STEELS IN PB-BI FLOW
- Density Wave Instability of Sodium Boiling Two-phase Flow in a Vertical Annulus at Low Pressure
- Corrosion of Steels in Lead-Bismuth Flow
- Metallurgical Analysis of a Tube Ruptured in the Lead Bismuth Corrosion Test Facility
- Broadband active sound control system for air-conditioning duct noise
- Feasibility and Performance of Magnetic Theromosyphon with Magnetic Fluid in Non-Gravity Field
- Flux Distribution in Phantom for Biomedical Use of Beam-Type Thermal Neutrons
- Study on High Speed Lithium Jet For Neutron Source of Boron Neutron Capture Therapy (BNCT)
- Experimental Study on Thermal Interaction of Ethanol Jets in High Temperature Fluorinert
- Density Wave Instability of Sodium Boiling Two-phase Flow in a Vertical Annulus at Low Pressure
- Phantom experiment and analysis for in vivo measurement of boron-10 concentrations in melanoma for boron neutron capture therapy.
- Numerical Analysis of Lead-Bismuth-Water Direct Contact Boiling Heat Transfer
- Burn-off and Production of CO and CO2 in the Oxidation of Nuclear Reactor-Grade Graphites in a Flow System.