Evaluation of Ordering Mobility from Antiphase Boundary Mobility in Fe3Al Using Phase-field Simulation
スポンサーリンク
概要
- 論文の詳細を見る
Determination of the mobilities for ordering transformation in Fe3Al has been attempted by comparing the rates of experimentally observed antiphase boundary (APB) migration with that simulated by a phase filed method (PFM). The simulated boundary mobility of D03-APB was sensitive to the ordering mobility. This allowed us to determine the ordering mobility for D03-LRO at 673 K to be 3 × 10–11 m3·J–1·s–1. However, the simulated boundary mobility of B2-APB was insensitive to the value of ordering mobility, and therefore the ordering mobility for B2-LRO could not be determined. The difference is ascribed to solute-drag which was quite significant at B2-APB.
著者
-
Minamino Yoritoshi
Department Of Adaptive Machine Systems Graduate School Of Engineering Osaka University
-
KOIZUMI Yuichiro
Institute for Materials Research, Tohoku University
-
Koizumi Yuichiro
Institute For Materials Research Tohoku University
-
Allen Samuel
Department of Materials Science and Engineering, Massachusetts Institute of Technology
-
Ouchi Masayuki
Department of Adaptive Machine Systems, Osaka University
関連論文
- Densification and Structural Evolution in Spark Plasma Sintering Process of Mechanically Alloyed Nanocrystalline Fe-23Al-6C Powder
- Interdiffusion in Co Solid Solutions of Co-Al-Cr-Ni System at 1423K
- Magneto-mechanical and Pseudoelastic Damping of Fe-Al Based Single Crystals
- Toughness of Ultrafine Grained Ferritic Steels Fabricated by ARB and Annealing Process
- Interdiffusion in α Solid Solution of the Al-Cu-Mg-Ag System
- Quaternary Diffusion in 7000 Aluminum Alloys
- Quaternary Diffusion in the α Solid Solutions of Al-Zn-Mg-Cu Alloys
- Effects of Pressure and Temperature on Consolidation of Nanocrystalline MA Powder of Al-10.7at%Ti-0.6at%Fe Supersaturated Solid Solution
- Diffusion of Copper in Nanocrystalline Al-7.8 at%Ti-0.3 at%Fe Alloy Prepared by Mechanical Alloying
- PREFACE
- Interdiffusion in β Phase of the Ternary Ti-Al-V System
- Construction of Processing Map for Biomedical Co-29Cr-6Mo-0.23C-0.14N Alloy by Using Compression Tests
- Development of Novel Methods for Compensation of Stress-strain Curves
- Evaluation of Ordering Mobility from Antiphase Boundary Mobility in Fe3Al Using Phase-field Simulation
- Evaluation of Ordering Mobility from Antiphase Boundary Mobility in Fe_3Al Using Phase-field Simulation
- Effect of Phase Transformation on Tensile Behavior of Co–Cr–Mo Alloy Fabricated by Electron-beam Melting