フィラメント・ワインディング・パイプの静的および疲れ曲げ強度
スポンサーリンク
概要
- 論文の詳細を見る
This paper presents the results of analysis and tests conducted on the static bending strength of carbon fiber filament-wound (F.W.) cylindrical pipes and also the results of tests on fatigue flexural strength of the same F.W. pipes. The relation between the winding angles of F.W. pipes and their fracture strengths under pure bending is investigated. The analytical method of the fracture strength of F.W. pipe is as follows; the threedimensional stress components referring to the plane including fibers are analysed, taking account of the elastic failure prior to the overall fracture and then are compared with the fundamental strengths corresponding to the four kinds of fracture mechanisms of unidirectional fiber reinforced composites. As the results of the analysis, the fracture modes under pure bending of the helical winding pipe are determined in relation to its winding angle; 1) Winding angle α=0°∼10°, Fracture caused by compression stress in the fiber direction. 2) Winding angle α=15°∼30°, Fracture caused by tensile stress normal to fibers. 3) Winding angle α=35°∼50°, Fracture caused by shear stress. 4) Winding angle α=55°∼90°, Fracture caused by tensile stress normal to fibers. The static and fatigue flexural tests are done on carbon fiber F.W. pipes in which helical winding angles are α=15°, 25°, 35°, 45°. By using a newly-devised chuck, the fatigue test of the F.W. cylindrical pipe was carried out successfully. The bending fracture test results on the fracture strength and fracture modes coincide with the analytical ones. The flexural fatigue test results which showed that the ratio of the flexural fatigue strength at 10<SUP>7</SUP> cycles to the static bending strength are about 0.3 for the helical winding angle α=15°, 25°, and about 0.2 for α=35°, 45°.
論文 | ランダム
- 手術手技 指導的助手からみた泌尿器科手術のポイント(5)
- 手術症例報告 直腸癌術後直腸膣瘻に対して薄筋弁充填術を施行した1例
- 手術症例報告 膵癌との鑑別に難渋したIgG4上昇を伴わない自己免疫性膵炎の1切除例
- 臨床研究 前立腺癌根治的全敵除術後における鼠径ヘルニア手術症例の検討
- 手術手技 十二指腸潰瘍穿孔に対する胆嚢パッチ修復術の有用性