WC-Co系超硬合金の圧縮疲労特性
スポンサーリンク
概要
- 論文の詳細を見る
As WC-Co based alloys have high hardness, compressive strength and Youngs modulus and excellent deformation resistance, they have been widely applied for wear and impact resistance tools. Therefore, it becomes very important to acquire knowledge on compressive fatigue characteristics of these alloys. In this study, the effects of Co content, WC grain size, HIP and coating treatment on compressive fatigue life of medium or coarse-grain WC-7-20mass% Co alloys and micrograin WC-6-l5mass%Co-0.4-1.2mass%Cr<SUB>3</SUB>C<SUB>2</SUB> alloys were mainly investigated and discussed with the variation of coercive force during fatigue process.<BR>The results obtained were as follows: (1) The fatigue life increased with decreasing Co content in the medium and coarse-grain alloys, but it was almost same with no relation to Co content in the micrograin alloys. The fatigue life showed an upward tendency with decreasing WC grain size. (2) The effect of HIP treatment on fatigue life was not observed at all. The fatigue life of PVD-coated alloy did not change and that of CVD-coated alloy remarkably decreased, comparing with that of non-coated alloy. (3) The coercive force of medium-grain WC-12mass%Co alloy increased with increasing applied maximum stress and repeated cycle, and it became much larger in the repeated compressive fatigue test than static compressive test. This increase of the coercive force was considered to be equivalent to the degree of toughness deterioration due to fatigue hardening in Co phase during fatigue process.
- 社団法人 粉体粉末冶金協会の論文
- 2003-05-15
著者
関連論文
- 炭化チタンウイスカー/アルミナ系複合セラミックスの緻密化, 機械的性質及び切削性能に対する放電プラズマ焼結の効果
- WC-Co系超硬合金の***ージョン摩耗
- WC-Cr_3C_2-Co系超硬合金の腐食特性に及ぼすCo含有量の影響
- H2SO4水溶液中における各種WC-Co系超硬合金の耐食性評価
- WC-10%Co合金の腐食特性に及ぼす合金炭素量およびCr_3C_2添加の影響
- YAGレーザー加工によるWC-Co系超硬合金の耐熱衝撃性評価
- 冷間鍛造用超硬合金の曲げ疲労特性
- 難削木質複合材料の切削加工(難削材加工)
- 炭化チタンウイスカー/アルミナ系複合体の機械的性質,耐酸化性及び切削性能に対するウイスカー径の影響
- 炭化チタンウイスカー/アルミナ系複合体の機械的特性と切削性能
- 各種表面改質および加工を施した超硬合金の技術開発
- 高Co超硬合金のポア形成に関する一考察
- 超硬合金の曲げおよび圧縮疲労特性に関する研究
- 金型用超硬合金の最新動向
- WC-1mass%Cr_3C_2-12mass%Ni 超硬合金の疲労特性
- WC-12mass%Co超硬合金の曲げ疲労特性に及ぼすHIP処理および表面性状の影響
- 506 超硬合金の疲労特性(OS フレッティング摩耗と疲労)
- ニューPVDコーティング「DZコート」 (特集 最新コーティング工具のすべて) -- (最新コ-ティング工具の機能と活かし方)
- κ-アルミナのX線回折データについて
- 新PVDコ-ティング材種「JC4030」と「JC3645」の開発
- PVDコ-テッド超硬合金 (コ-ティング工具はこう使う--高能率切削のための選び方・使い方) -- (コ-ティング工具材料編)
- WC-Co系超硬合金の圧縮疲労特性
- 超微粒子超硬合金の曲げ疲労特性
- 超微粒子超硬合金の曲げ疲労特性
- WC-Co系超硬合金の圧縮疲労特性
- 超硬合金の特性と選定基準 (特集 金型の材料と加工)
- TiN 被覆したWC-Co超硬合金の残留応力と強度に関するX線的研究(X線材料強度小特集)
- WC-βt-Ti(C, N)-Co合金の諸特性と切削性能
- 2硼化チタン(TiB2)系セラミックスによるパ-ティクルボ-ドの切削--基本工具材,微粒子化工具材の切削性能
- WC-βt-Ti(C,N)-Co合金の諸特性と切削性能
- WC-βt-Ti(C,N)-Co合金の切削性能に及ぼす表面近傍組織の影響
- Effects of the Microstructure Near Surface on Cutting Performance of WC-βt-Ti(C, N)-Co Alloys
- SEPB法によるサ-メットと超硬合金の破壊靭性 (硬質材料)
- 被覆超硬合金の表面残留応力に関する研究
- SiCウイスカ-強化Al2O3セラミックスの機械的特性